Home › Engine / Hybrid System › A25B-FXS (COOLING) › RADIATOR › 2019.02–2020.08
RM3620E _51 Engine / Hybrid System _080121 A25B-FXS COOLING _0389726 RADIATOR A

A25B-FXS COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 53895B 1.REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

Hide 53896B 2.REMOVE FRONT FENDER FRONT SPLASH SHIELD LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 52614 7.REMOVE FRONT BUMPER NO. 2 ENERGY ABSORBER

Hide 52021 8.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 17750A 9.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 16681A 10.REMOVE UPPER RADIATOR AIR GUIDE PLATE

a.
A435722

Remove the 5 clips and radiator upper air guide plate.


Hide 16595B 12.REMOVE NO. 1 RADIATOR AIR GUIDE LH

a.
A435756

Remove the clip.


b.

Detach the claw and guide and remove the No. 1 radiator air guide LH.


Hide 16593B 13.REMOVE NO. 1 RADIATOR AIR GUIDE RH

a.
A435695

Remove the clip.


b.

Detach the claw and guide and remove the No. 1 radiator air guide RH.


Hide 86570 15.REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY

Hide 53205 16.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A435691

Disconnect the 2 horn connectors.


b.
A435697C01
0.76,0.354 0.948,0.354 0.948,0.354 1.313,1.104 true 1.479,1.26 1.854,1.74 1.854,1.74 2,1.74 true 0.563,0.281 0.875,0.438 0.313,0.156 10 false *1 2.063,1.656 2.313,1.844 0.25,0.188 10 true *2
*1 Hood Lock Control Cable Assembly
*2 Wire Harness


Detach the 2 clamps and disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.


c.

Detach the 3 clamps and disconnect the wire harness from the upper radiator support sub-assembly.


d.
A435699

Remove the 4 bolts and upper radiator support sub-assembly.


Hide 16282 17.DISCONNECT NO. 5 WATER BY-PASS HOSE

a.
A435700

Slide the clip and disconnect the No. 5 water by-pass hose from the radiator assembly.


Hide 16283 18.DISCONNECT NO. 6 WATER BY-PASS HOSE

a.
A435703

Disconnect the No. 6 water by-pass hose from the radiator assembly.


Hide 16571C 19.DISCONNECT NO. 1 RADIATOR HOSE

a.
A435704

Detach the clamp and disconnect the No. 1 radiator hose from the fan with motor assembly.


b.

Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.


Hide 16572D 20.DISCONNECT NO. 2 RADIATOR HOSE

a.
A435707

Detach the clamp and disconnect the No. 2 radiator hose from the fan with motor assembly.


b.

Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide G9228A 21.DISCONNECT INVERTER COOLING HOSE

a.
A435724C01
0.875,0.958 1.333,0.219 1.333,0.219 1.479,0.219 true 0.417,0.969 0.927,1.594 0.927,1.594 1.083,1.594 true 1.177,1.51 1.385,1.677 0.208,0.167 10 true *1 1.583,0.146 1.844,0.323 0.26,0.177 10 true *2
*1 No. 4 Inverter Cooling Hose
*2 No. 5 Inverter Cooling Hose


Detach the clamp and disconnect the No. 4 inverter cooling hose from the fan with motor assembly.


b.

Detach the 3 clamps and disconnect the No. 5 inverter cooling hose from the fan with motor assembly.


Hide 16400 22.REMOVE RADIATOR ASSEMBLY

a.
A435714C01
1.125,0.594 1.25,0.406 1.25,0.406 1.427,0.406 false 1.479,0.313 1.792,0.469 0.313,0.156 10 false *a
*a Lock Lever


Detach the claw and raise the lock lever to disconnect the cooling fan motor connector as shown in the illustration.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.



b.

Detach the 2 wire harness clamps.


c.
A435711

Detach the 2 claws.


d.

Detach the 2 guides and disconnect the cooler condenser assembly with the radiator assembly (for Inverter Coolant) from the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly with the radiator assembly (for Inverter Coolant) when disconnecting the cooler condenser assembly with the radiator assembly (for Inverter Coolant).



e.

Remove the radiator assembly with the fan with motor assembly from the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly with the radiator assembly (for Inverter Coolant) or pipe and hose when removing the radiator assembly with the fan with motor assembly.



f.
A435719

Detach the 2 claws.


g.

Detach the 2 guides and remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.



Hide 16523A 23.REMOVE RADIATOR SUPPORT CUSHION

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 24.REMOVE LOWER RADIATOR SUPPORT

a.

Remove the 2 lower radiator supports from the radiator assembly.