89890A
1.INSTALL BATTERY ECU ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the battery ECU assembly to the HV battery with the 3 nuts.
| *a | Black Label |
Check color of the label.
If the battery ECU assembly has been struck or dropped, replace it.
Connect the 3 battery ECU assembly connectors and move the lock lever to lock them.
Make sure that the connectors are connected securely.
Engage the clamp.
G929A
2.INSTALL NO. 1 HV BATTERY HOSE
Be sure to wear insulated gloves and protective goggles.
Engage the 2 claws to install the No. 1 HV battery hose to the HV battery.
Install the 2 clips.
G920NB
3.INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the upper HV battery cover sub-assembly to the HV battery with the 5 bolts and 6 nuts.
82161
4.CONNECT FLOOR WIRE
G92PF
5.INSTALL NO. 4 HV BATTERY PROTECTOR
82161
6.CONNECT FLOOR WIRE
G9290A
7.INSTALL HYBRID BATTERY HOSE ASSEMBLY
G92N4A
8.INSTALL NO. 1 HV BATTERY COVER PANEL RH
71033
9.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
58464D
10.INSTALL BATTERY SERVICE COVER BOARD
58466J
11.INSTALL NO. 2 BATTERY SERVICE COVER BOARD
67917C
12.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
58467H
13.INSTALL NO. 3 BATTERY SERVICE COVER BOARD
67918E
14.INSTALL REAR DOOR SCUFF PLATE LH
899A0
15.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
72693
16.INSTALL REAR SEAT CUSHION LOCK HOOK
17.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
G3834
18.INSTALL SERVICE PLUG GRIP
19.PERFORM INITIALIZATION