1.DRAIN ENGINE OIL
2.DRAIN ENGINE COOLANT
16361A
3.REMOVE FAN & GENERATOR V BELT
Remove the fan and generator V belt (See page Engine / Hybrid System>3UR-FE ENGINE MECHANICAL>DRIVE BELT>REMOVAL).
04152
4.REMOVE OIL FILTER ELEMENT
Remove the oil filter element (See page Engine / Hybrid System>3UR-FE LUBRICATION>OIL AND OIL FILTER>REPLACEMENT).
83520
5.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY
88320
6.SEPARATE COOLER COMPRESSOR ASSEMBLY
16268A
7.REMOVE WATER BY-PASS PIPE HOSE
Remove the 3 bolts.
Disconnect the 4 hoses and remove the water by-pass pipe.
15781
8.REMOVE NO. 1 OIL COOLER BRACKET
Remove the 2 nuts and bracket.
Disconnect the ground wire from the cylinder block.
15671
9.REMOVE OIL FILTER BRACKET
Remove the 2 bolts, 2 nuts and filter bracket.
Remove the 2 O-rings.
15710
10.REMOVE OIL COOLER ASSEMBLY
Remove the 5 nuts and oil cooler from the oil filter bracket.
Remove the 2 O-rings.
15788
11.REMOVE OIL COOLER SPACER
Remove the bolt and oil cooler spacer from the oil filter bracket.
Remove the gasket.