1.INSTALL STEREO COMPONENT TUNER ASSEMBLY
Attach the 2 guides to install the stereo component tuner assembly as shown in the illustration.
86212C
2.INSTALL NO. 2 RADIO RECEIVER BRACKET
Install the No. 2 radio receiver bracket with the 6 bolts.
86211J
3.INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 6 bolts.
4.INSTALL NO. 1 NAVIGATION WIRE
Connect each connector to install the No. 1 navigation wire.
55421B
5.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
Attach the 2 guides to install the upper instrument cluster finish panel.
Install the 4 screws.
86120
6.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
84010A
7.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
55434B
8.INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL
55410C
9.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
58805C
10.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
58804A
11.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
33504F
12.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
55046A
13.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
53601
14.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55318C
15.INSTALL INSTRUMENT SIDE PANEL LH
62112
16.INSTALL COWL SIDE TRIM BOARD LH
67914
17.INSTALL FRONT DOOR SCUFF PLATE LH