53932B
1.REMOVE FRONT END PANEL LH (w/o Headlight Cleaner System)
53931B
2.REMOVE FRONT END PANEL RH (w/o Headlight Cleaner System)
Use the same procedure as for the LH side.
53932B
3.REMOVE FRONT END PANEL LH (w/ Headlight Cleaner System)
53931B
4.REMOVE FRONT END PANEL RH (w/ Headlight Cleaner System)
Use the same procedure as for the LH side.
52119A
5.REMOVE FRONT BUMPER COVER
89341B
6.REMOVE NO. 2 ULTRASONIC SENSOR
Detach the 4 claws and remove the No. 2 ultrasonic sensor as shown in the illustration.
The illustration shows the No. 2 ultrasonic sensor for the RH. The horizontal orientation of the No. 2 ultrasonic sensor for the LH is opposite that of the image shown in the illustration.