Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
72760D
1.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Climate Control Seat System)
Attach the 3 claws to install the bush.
Install the lumbar support adjuster assembly with the 2 screws.
Connect the connector.
Attach the 4 hooks to install the seatback spring.
Install the 4 springs.
Attach the 2 wire harness clamps and connect the connector.
72760D
2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/o Climate Control Seat System)
Attach the 3 claws to install the bush.
Install the lumbar support adjuster with the 2 screws.
Connect the lumbar support adjuster connector.
Attach the 6 hooks to install the seatback spring.
3.INSTALL SEATBACK COVER WITH PAD
71931A
4.INSTALL FRONT SEAT HEADREST SUPPORT
71862
5.INSTALL FRONT SEAT CUSHION SHIELD INNER LH
73240
6.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71812D
7.INSTALL FRONT SEAT CUSHION SHIELD LH
84921A
8.INSTALL RECLINING POWER SEAT SWITCH KNOB
84921B
9.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH
10.INSTALL FRONT SEAT ASSEMBLY LH
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).