73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt LH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Connect the connector and engage the 5 clamps.
73240
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt LH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Connect the connector and engage the 5 clamps.
73240
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System)
Install the front seat belt anchor plate.
Install the front seat inner belt LH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Connect the connector and engage the 6 clamps.
73230
4.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt RH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Engage the 3 clamps.
73230
5.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt RH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Connect the connector and engage the clamp.
73230
6.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System)
Install the front seat belt anchor plate.
Install the front seat inner belt RH with the nut.
Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
Connect the connector and engage the clamp.
71862
7.INSTALL FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat)
8.INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION).
9.INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).