Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
87510L
1.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH
Set the seat cushion heater with the name stamp side facing the seat cushion cover.
Install the seat cushion heater with new 30 tack pins.
71072S
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Leg Support Adjustment Switch)
71072S
3.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Leg Support Adjustment Switch)
4.INSTALL SEAT CUSHION COVER WITH PAD (w/ Leg Support Adjustment Switch)
5.INSTALL SEAT CUSHION COVER WITH PAD (w/o Leg Support Adjustment Switch)
84922C
6.INSTALL FRONT POWER SEAT SWITCH LH
71862
7.INSTALL FRONT SEAT CUSHION SHIELD INNER LH
73240
8.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71812D
9.INSTALL FRONT SEAT CUSHION SHIELD LH
84921A
10.INSTALL RECLINING POWER SEAT SWITCH KNOB LH
84921B
11.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH
12.INSTALL FRONT SEAT ASSEMBLY LH
Install the front seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).