Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
1.REMOVE FRONT SEAT ASSEMBLY LH
Remove the front seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL).
84921B
2.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH
84921A
3.REMOVE RECLINING POWER SEAT SWITCH KNOB LH
71812D
4.REMOVE FRONT SEAT CUSHION SHIELD LH
73240
5.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
71862
6.REMOVE FRONT SEAT CUSHION SHIELD INNER LH
84922C
7.REMOVE FRONT POWER SEAT SWITCH LH
8.REMOVE SEAT CUSHION COVER WITH PAD (w/ Leg Support Adjustment Switch)
9.REMOVE SEAT CUSHION COVER WITH PAD (w/o Leg Support Adjustment Switch)
71072S
10.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Leg Support Adjustment Switch)
71072S
11.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Leg Support Adjustment Switch)
87510L
12.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
Cut off the 30 tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion cover.