Use the same procedure for the LH side and RH side.
The procedure listed below is for the RH side.
73670A
1.INSTALL REAR SEAT OUTER BELT ANCHOR BRACKET ASSEMBLY RH
Align the rear seat outer belt anchor bracket positioning claw with the hole, and install the rear seat outer belt anchor bracket with the 2 bolts.
88566R
2.INSTALL REAR ROOF NO. 1 AIR DUCT (for RH Side)
Install the rear roof No. 1 air duct with the 3 clips.
73560
3.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH
Align the claws on the body with the rear No. 2 seat outer belt retractor positioning holes.
Install the rear No. 2 seat outer belt with the 2 bolts.
First install bolt A, and then install bolt B.
for Bolt A
for Bolt B
Install the shoulder anchor to the rear seat outer belt anchor bracket with the nut.
73187A
4.INSTALL REAR SEAT SHOULDER BELT GUIDE
Install the rear seat shoulder belt guide with the 2 screws.
86160U
5.INSTALL QUARTER SIDE SPEAKER ASSEMBLY (for RH Side)
87217D
6.INSTALL REAR SIDE NO. 1 AIR DUCT (for RH Side)
88892J
7.INSTALL COVER SUB-ASSEMBLY (for RH Side)
62533D
8.INSTALL QUARTER TRIM BRACKET RH (for RH Side)
68910
9.INSTALL POWER BACK DOOR UNIT ASSEMBLY (w/ Power Back Door)
85475
10.INSTALL POWER BACK DOOR ROD (w/ Power Back Door)
62170A
11.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH
Install the curtain shield airbag assembly (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CURTAIN SHIELD AIRBAG ASSEMBLY>INSTALLATION).