Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER AND WASHER SYSTEM

WIPER AND WASHER SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here



1. FRONT WIPER AND WASHER SYSTEM 
Symptom
Suspected area
See page
Front wipers do not operate.
1. IG1 relay
-
2. WIP fuse
-
3. Windshield wiper switch assembly
Click here
4. Windshield wiper motor assembly
Click here
5. Wire harness or connector
-
Front wipers do not operate in LO or HI.
1. Windshield wiper switch assembly
Click here
2. Windshield wiper motor assembly
Click here
3. Wire harness or connector
-
Front wipers do not operate in INT.
1. Windshield wiper switch assembly
Click here
2. Windshield wiper motor assembly
Click here
3. Wire harness or connector
-
Front washer motor does not operate.
1. IG1 relay
-
2. WSH fuse
-
3. Windshield wiper switch assembly
Click here
4. Front washer motor
Click here
5. Wire harness or connector
-
Front wipers do not operate when front washer switch is in the ON position.
1. Windshield wiper switch assembly
Click here
2. Windshield wiper motor assembly
Click here
3. Wire harness or connector
-
Front washer fluid is not injected.
Washer hose and nozzle
-
When front wiper switch is in HI position, the wiper blade is in contact with the body.
1. Front wiper arm installation position
Click here
2. Windshield wiper motor assembly
Click here
When the front wiper switch is OFF, the wiper blade dose not retract or retract in the wrong position.
1. Front wiper arm installation position
Click here
2. Windshield wiper motor assembly
Click here

2. REAR WIPER AND WASHER SYSTEM 
Symptom
Suspected area
See page
Rear wiper does not operate.
1. IG1 relay
-
2. RR WIP fuse
-
3. Windshield wiper switch assembly
-
4. Rear wiper motor and bracket assembly
-
5. Wire harness or connector
-
Rear wiper does not operate in ON or INT.
1. Windshield wiper switch assembly
-
2. Rear wiper motor and bracket assembly
-
3. Wire harness or connector
-
Rear washer motor does not operate.
1. IG1 relay
-
2. WSH fuse
-
3. Windshield wiper switch assembly
Click here
4. Rear washer motor
Click here
5. Wire harness or connector
-
Rear wiper does not operate when rear washer switch is in the ON position (Rear wiper switch is ON side).
1. Windshield wiper switch assembly
Click here
2. Rear wiper motor and bracket assembly
Click here
3. Wire harness or connector
-
Rear washer fluid is not injected.
Washer hose and nozzle
-
When rear wiper switch is in ON position, the wiper blade is in contact with the body
1. Rear wiper blade installation position
Click here
2. Rear wiper motor assembly
Click here
When the wiper switch is OFF, the wiper blade dose not retract or retract in the wrong position.
1. Rear wiper blade installation position
Click here
2. Rear wiper motor assembly
Click here

3. WASHER FLUID LEVEL WARNING SYSTEM 
Symptom
Suspected area
See page
Washer level warning light comes on (Washer fluid level is normal).
1. Level warning switch assembly
-
2. Combination meter assembly
Click here
3. Wire harness or connector
-
Washer level warning light does not come on (Empty the washer fluid in washer tank assembly).
1. Level warning switch assembly
-
2. Combination meter assembly
Click here
3. Wire harness or connector
-