Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Materials harmful to health.
Contact with fluids harmful to health!
Note and follow safety information on containers.
Conduct all work in appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
16400
1.REMOVE RADIATOR ASSEMBLY (for B48)
16400
2.REMOVE RADIATOR ASSEMBLY (for B58)
16041
3.REMOVE NO. 2 RADIATOR ASSEMBLY (for B48)
16041
4.REMOVE NO. 2 RADIATOR ASSEMBLY (for B58)
33493A
5.REMOVE TRANSMISSION OIL COOLER
16546A
6.REMOVE UPPER RADIATOR PROTECTOR
Detach the guides (2) to remove the upper radiator protector (1).
16546B
7.REMOVE LOWER RADIATOR PROTECTOR
Detach the guides (1) to remove the lower radiator protector (2).
16454C
8.REMOVE RADIATOR SIDE PLATE LH
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
Loosen the T30 bolts (1).
Disconnect the oil cooler tubes (1).
Remove the radiator side plate LH (1) in the direction of the arrow.
9.REMOVE OIL COOLER TUBE
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Materials harmful to health.
Contact with fluids harmful to health!
Note and follow safety information on containers.
Conduct all work in appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Loosen the bolt (1).
Loosen the T25 screw (2).
Loosen No. 3 automatic transmission oil cooler tube clamp (3).
Disconnect the No. 1 oil cooler inlet tube (4) from the transmission oil thermostat.
Disconnect the No. 1 oil cooler outlet tube (5) from the transmission oil thermostat.
Drain, catch and dispose of the automatic transmission fluid.
Loosen the T25 screw (1).
Loosen the No. 1 automatic transmission oil cooler tube clamp (2).
Feed the oil cooler tubes out and remove.