Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY
Install the headlight assembly (2) with the T30 bolts (1).
Install the T30 bolts (1).
Connect the connector (1).
Engage the clamps (3) to connect the wiring harness (2).
2.INSTALL FRONT BUMPER ASSEMBLY
3.ADJUST HEADLIGHT AIMING
4.ADJUST MILLIMETER WAVE RADAR SENSOR (w/ Toyota Supra Safety)
Before starting adjustment:
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>BEFORE STARTING ADJUSTMENT
Adjustment:
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT