Home › Vehicle Exterior › HORN › HORN
RM3650E _59 Vehicle Exterior _079917 HORN _0387837 HORN A

HORN  HORN  INSTALLATION  


PROCEDURE

Hide 86510 1.INSTALL HIGH PITCHED HORN ASSEMBLY

a.

Install the high pitched horn assembly with the T30 bolt.

Torque:
11.8 N*m (120 kgf*cm, 9 ft.*lbf)


b.

Connect the connector.


Hide 86510 2.INSTALL HIGH PITCHED HORN ASSEMBLY (for Dual Type)

HINT:

Use the same procedure as for the opposite side.


Hide 81150 3.INSTALL HEADLIGHT ASSEMBLY LH

Hide 81110 4.INSTALL HEADLIGHT ASSEMBLY RH (for Dual Type)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY>INSTALLATION


Hide 6.ADJUST MILLIMETER WAVE RADAR SENSOR (w/ Toyota Supra Safety)