Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Antistatic work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
64330D
1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
62480A
2.REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
62470A
3.REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
Use the same procedure as for the LH side.
64288D
4.SEPARATE TRANSVERSE PIPE TRIM
62609
5.REMOVE SEAT BELT HOLE COVER SUB-ASSEMBLY LH
62608
6.REMOVE SEAT BELT HOLE COVER SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
64277L
7.REMOVE TRANSVERSE PIPE
62420A
8.REMOVE CENTER PILLAR GARNISH ASSEMBLY LH
62636A
9.REMOVE QUARTER TRIM UPPER PANEL LH
10.REMOVE LTE COMPENSATOR
Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Antistatic work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock plug connections (1) and disconnect.
Loosen nuts (2).
Remove the LTE compensator (3).