Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › TENSION ARM
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388900 TENSION ARM A

B58 ENGINE MECHANICAL  TENSION ARM  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.



·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.

-

For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 11201 1.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

Hide 4.INSPECT AND ADJUST CAMSHAFT

Hide 5.INSPECT AND ADJUST CAMSHAFT (CYLINDERS 3 AND 4)

Hide 13800 8.REMOVE INTERMEDIATE LEVER

a.
A441624

Remove the intermediate lever (1).


b.

Repeat the step for all intermediate levers (1).