Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY
RM3650E _55 Steering _080257 STEERING COLUMN _0389216 STEERING COLUMN ASSEMBLY A

STEERING COLUMN  STEERING COLUMN ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Pyrotechnic components.

Danger! Life-threatening injuries!

-

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.

-

Replace any damaged part or ones that have been dropped.


·
B475753

Airbag unit.

Danger! Life-threatening injuries!

-

Before performing any work on the airbag, always disconnect the battery earth lead from the battery.

-
B528833C08
0,0 0,0 false
V100155

Cushion (Airbag Itself)


Airbag unit may only be set down with the cushion (airbag itself) facing upwards




HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 51219 1.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR (for LHD)

Hide 12611 2.REMOVE NO. 1 ENGINE COVER (for RHD)

Hide 45220 3.DISCONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY

Hide 84310 4.REMOVE TURN SIGNAL SWITCH ASSEMBLY

Hide 73900 5.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 45250 6.REMOVE STEERING COLUMN ASSEMBLY

a.
C413502

Release the vehicle wiring harness from the brackets (1) and put to one side.


b.
C413503

Loosen T45 bolts (1).


c.
C413504

Release the T45 bolts (2) and remove the steering column assembly (1).

NOTICE:

Secure the steering column (1) against dropping.