Home › Steering › STEERING COLUMN › STEERING PAD SWITCH
RM3650E _55 Steering _080257 STEERING COLUMN _0389219 STEERING PAD SWITCH A

STEERING COLUMN  STEERING PAD SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Pyrotechnic components.

Danger! Life-threatening injuries!

-

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.

-

Replace any damaged part or ones that have been dropped.




NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




PROCEDURE

Hide 45130 1.REMOVE HORN BUTTON ASSEMBLY

Hide 84610F 2.REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY

Hide 84250A 3.REMOVE STEERING PAD SWITCH ASSEMBLY

a.
C413516

Release the T25 bolt (1) on the rear side of the steering wheel (2).

HINT:

Use the same procedure for the opposite side.



b.
C413517

Unlock plug connection (1) and disconnect.

HINT:

Use the same procedure for the opposite side.



c.
C413518

Carefully release and remove the steering pad switch assembly (1) from the latch mechanisms (2).