Home › Engine / Hybrid System › B58 (FUEL) › FUEL FILTER › from 2021.03
RM3650E _51 Engine / Hybrid System _080099 B58 FUEL _0477131 FUEL FILTER A

B58 FUEL  FUEL FILTER  REPLACEMENT  


PROCEDURE

Hide 58166A 2.REMOVE FRONT FLOOR COVER LH

Hide 23300J 3.REMOVE FUEL FILTER ASSEMBLY

CAUTION:

Working on fuel system.

Risk of fire! Danger of explosion!

·

When working on the fuel system, make sure that the workbay is sufficiently ventilated, e.g. using extraction unit.

·

Tightly seal off open lines and connections; collect any escaping fuel directly at the point of exit.

·

No fire, sparks, open flames or smoking.



HINT:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.


a.
A489930

Unlock snap fastener and disconnect the fuel line (1).


b.

Unlock snap fastener and disconnect the fuel lines (2).


c.

Loosen the nuts (3).


d.

Unlock snap fastener and disconnect the holder (4).


e.

Remove the fuel filter (5).


Hide 23300J 4.INSTALL FUEL FILTER ASSEMBLY

a.
A489930

Install a new fuel filter (5).


b.

Engage holder(4) and lock snap fastener.

i.

Snap fastener must engage audibly.



c.

Install the nuts (3).

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


d.

Connect fuel lines (2) and lock snap fastener.

i.

Snap fastener must engage audibly.



e.

Connect fuel lines (1) and lock snap fastener.

i.

Snap fastener must engage audibly.