Working on fuel system.
Risk of fire! Danger of explosion!
When working on the fuel system, make sure that the workbay is sufficiently ventilated, e.g. using extraction unit.
Tightly seal off open lines and connections; collect any escaping fuel directly at the point of exit.
No fire, sparks, open flames or smoking.
50819
1.REMOVE FRONT FLOOR COVER
58166A
2.REMOVE FRONT FLOOR COVER LH
23300J
3.REMOVE FUEL FILTER ASSEMBLY
Working on fuel system.
Risk of fire! Danger of explosion!
When working on the fuel system, make sure that the workbay is sufficiently ventilated, e.g. using extraction unit.
Tightly seal off open lines and connections; collect any escaping fuel directly at the point of exit.
No fire, sparks, open flames or smoking.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Unlock snap fastener and disconnect the fuel line (1).
Unlock snap fastener and disconnect the fuel lines (2).
Loosen the nuts (3).
Unlock snap fastener and disconnect the holder (4).
Remove the fuel filter (5).
23300J
4.INSTALL FUEL FILTER ASSEMBLY
Install a new fuel filter (5).
Engage holder(4) and lock snap fastener.
Snap fastener must engage audibly.
Install the nuts (3).
Connect fuel lines (2) and lock snap fastener.
Snap fastener must engage audibly.
Connect fuel lines (1) and lock snap fastener.
Snap fastener must engage audibly.
58166A
5.INSTALL FRONT FLOOR COVER LH
50819
6.INSTALL FRONT FLOOR COVER