Home › Engine / Hybrid System › 1UR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM27M0U _51 Engine / Hybrid System _049107 1UR-FE ENGINE MECHANICAL _0234040 FRONT CRANKSHAFT OIL SEAL A

1UR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16571 4.REMOVE INLET RADIATOR HOSE

Hide 48811 7.DISCONNECT FRONT STABILIZER BAR

a.
A163772

Remove the 4 bolts, 2 stabilizer brackets and 2 stabilizer bushes. Then disconnect the stabilizer bar.


Hide 88320 8.DISCONNECT COOLER COMPRESSOR ASSEMBLY

Hide 83520 9.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

Hide 13521A 12.REMOVE CRANKSHAFT TIMING GEAR KEY

a.
U151655

Remove the crankshaft timing gear key from the crankshaft.


Hide 11301C 13.REMOVE FRONT CRANKSHAFT OIL SEAL

a.
A214556

Using a screwdriver, pry out the oil seal.

NOTICE:

Do not damage the surface of the oil seal press fit hole and crankshaft.


HINT:

Tape the screwdriver tip before use.