Home › Engine / Hybrid System › 1UR-FE COOLING › FAN
RM27M0U _51 Engine / Hybrid System _049113 1UR-FE COOLING _0234066 FAN A

1UR-FE COOLING  FAN  INSTALLATION  


PROCEDURE

Hide 16361 1.INSTALL FAN

A151830

a.

Install the fan to the fluid coupling with the 4 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 16711 2.INSTALL FAN SHROUD

a.

Install the fan pulley to the fan bracket.


b.

Place the fan shroud together with the fluid coupling fan between the radiator and engine.

NOTICE:

Be careful not to damage the radiator core



c.

Temporarily install the fluid coupling fan to the fan bracket with the 4 nuts. Tighten the nuts as much as possible by hand.


d.
A215576

Attach the shroud's claws to the radiator as shown in the illustration.


e.

Install the shroud with the 2 bolts.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


f.

Connect the reservoir hose to the upper radiator tank.


g.

Install the fan and generator V-belt (See page Engine / Hybrid System>1UR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION).


h.
A217580

Tighten the 4 nuts of the fluid coupling fan.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 16571 3.INSTALL INLET RADIATOR HOSE

a.
A215578E02
2.188,0.75 2.24,0.75 2.24,0.75 2.427,0.583 false 1.052,0.885 1.115,0.271 1.115,0.271 1.063,0.271 false 1.104,0.948 1.292,1.281 1.292,1.281 1.365,1.281 false 0.385,0.188 1.063,0.344 0.677,0.156 10 false Protrusion 1.406,1.208 2.135,1.365 0.729,0.156 10 false Paint Mark 2.74,1.021 3.135,1.24 0.396,0.219 10 false Front 2.833,0.333 3.156,0.479 0.323,0.146 10 false 90° 1.958,0.656 2.208,0.802 0.25,0.146 10 false 45° 2.49,3.927 2.813,4.073 0.323,0.146 10 false 90° 1,3.906 1.552,4.063 0.552,0.156 10 false RH Side 2.063,0.146 2.385,0.302 0.323,0.156 10 false Top 1.635,3.406 1.958,3.563 0.323,0.156 10 false Top

Install the inlet radiator hose.

HINT:

The direction of each hose clamp is indicated in the illustration.