Home › Engine / Hybrid System › DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY(for 1UR-FE)
RM27M0U _51 Engine / Hybrid System _049121 DIFFERENTIAL _0234098 DIFFERENTIAL CARRIER ASSEMBLY(for 1UR-FE) A

DIFFERENTIAL  DIFFERENTIAL CARRIER ASSEMBLY(for 1UR-FE)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 37110 2.REMOVE PROPELLER SHAFT ASSEMBLY

a.

Remove the propeller shaft for 2WD (See page Drivetrain>PROPELLER SHAFT>PROPELLER SHAFT ASSEMBLY(for 2WD)>REMOVAL).


b.

Remove the propeller shaft for 4WD (See page Drivetrain>PROPELLER SHAFT>PROPELLER SHAFT ASSEMBLY(for 4WD)>REMOVAL).


Hide 42312 4.REMOVE REAR AXLE SHAFT LH

a.

Remove the rear axle shaft LH (See page Drivetrain>AXLE>REAR AXLE SHAFT>REMOVAL).


Hide 42311L 5.REMOVE REAR AXLE SHAFT RH

HINT:

Use the same procedure described for the LH side.


Hide 41110 6.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

a.
C159767

Remove the 10 nuts, 10 washers and differential carrier.

NOTICE:

Be careful not to damage the contact surfaces of the differential carrier and rear axle housing.



b.

Remove the gasket.