1.DRAIN TRANSFER OIL
Remove the lower transfer case protector (See page Drivetrain>WF1AM TRANSFER>TRANSFER ASSEMBLY>DISASSEMBLY).
Remove the transfer case plug (filler) and transfer case plug (drain), and drain the transfer oil.
| *1 | Transfer Case Plug (Filler) |
| *2 | Transfer Case Plug (Drain) |
2.ADD TRANSFER OIL
Install a new transfer case plug (drain).
Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the transfer case plug (filler) hole.
Add oil slowly.
Add oil a little at a time, waiting several minutes between each addition of oil.
Wait approximately 5 minutes and check that the oil level has not changed.
Install a new transfer case plug (filler).
Install the lower transfer case protector (See page Drivetrain>WF1AM TRANSFER>TRANSFER ASSEMBLY>REASSEMBLY).