84140
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.
| *A | for Manual Tilt, for Manual Tilt and Manual Telescopic Steering Column | *B | for Power Tilt and Power Telescopic Steering Column |
While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
| *A | for Manual Tilt, for Manual Tilt and Manual Telescopic Steering Column | *B | for Power Tilt and Power Telescopic Steering Column |
84650
2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
84306
3.INSTALL SPIRAL CABLE SUB-ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
5. CHECK SRS WARNING LIGHT