86180
1.INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)
86212C
2.INSTALL NO. 2 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 2 radio receiver bracket with the 3 bolts.
w/ Satellite Radio:
Install the No. 2 radio receiver bracket with the 5 bolts.
86211J
3.INSTALL NO. 1 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 1 radio receiver bracket with the 3 bolts.
w/ Satellite Radio:
Install the No. 1 radio receiver bracket with the 5 bolts.
86842
4.INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
86140A
5.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
Connect each connector.
Insert the radio and display receiver assembly with bracket and attach the 2 guides and 3 clips on its backside.
When inserting the radio receiver, do not press its knobs.
Install the radio and display receiver assembly with bracket with the 4 bolts.
55900
6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
58804A
7.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
58805C
8.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
33504F
9.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).