Home › Audio / Visual / Telematics › AUDIO / VIDEO › SATELLITE RADIO TUNER(for Floor Shift Type)
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234293 SATELLITE RADIO TUNER(for Floor Shift Type) A

AUDIO / VIDEO  SATELLITE RADIO TUNER(for Floor Shift Type)  INSTALLATION  


PROCEDURE

Hide 86180 1.INSTALL STEREO COMPONENT TUNER ASSEMBLY

a.
B355131

Attach the 2 guides to install the stereo component tuner assembly as shown in the illustration.


Hide 86212C 2.INSTALL NO. 2 RADIO RECEIVER BRACKET

a.

Install the No. 2 radio receiver bracket with the 5 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 86211J 3.INSTALL NO. 1 RADIO RECEIVER BRACKET

a.

Install the No. 1 radio receiver bracket with the 5 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 86842 4.INSTALL NO. 1 NAVIGATION WIRE

a.

Connect each connector to install the No. 1 navigation wire.


Hide 55900 6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Hide 10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).