86180
1.INSTALL STEREO COMPONENT TUNER ASSEMBLY
Attach the 2 guides to install the stereo component tuner assembly as shown in the illustration.
86212C
2.INSTALL NO. 2 RADIO RECEIVER BRACKET
Install the No. 2 radio receiver bracket with the 5 bolts.
86211J
3.INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 5 bolts.
86842
4.INSTALL NO. 1 NAVIGATION WIRE
Connect each connector to install the No. 1 navigation wire.
86140A
5.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
55900
6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
55479B
7.INSTALL CENTER LOWER INSTRUMENT COVER
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).