Trailer brake control ECU (Brake control with bracket relay) exchanges signals with the ECM, skid control ECU and combination meter via CAN communication.
| DTC Code | DTC Detection Conditions | Trouble Area |
|---|---|---|
| U0101 | CAN signal from ECM is lost or malfunctioning for 5.1 seconds. | ·
CAN communication system ·
ECM ·
Trailer brake control ECU (Brake control with bracket relay) |
| U0129 | CAN signal from skid control ECU is lost or malfunctioning for 3 seconds. | ·
CAN communication system ·
Skid control ECU ·
Trailer brake control ECU (Brake control with bracket relay) |
| U0155 | CAN signal from combination meter is lost or malfunctioning for 3.3 seconds. | ·
CAN communication system ·
Combination meter ·
Trailer brake control ECU (Brake control with bracket relay) |
Clear the DTC(s) (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>TRAILER BRAKE CONTROL SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>TRAILER BRAKE CONTROL SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output | B |
A
B
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)