Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION RECEIVER(for Column Shift Type)
RM27M0U _56 Audio / Visual / Telematics _049158 NAVIGATION / MULTI INFO DISPLAY _0234438 NAVIGATION RECEIVER(for Column Shift Type) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION RECEIVER(for Column Shift Type)  INSTALLATION  


PROCEDURE

Hide 86180 1.INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)

Hide 86212C 2.INSTALL NO. 2 RADIO RECEIVER BRACKET

a.

w/o Satellite Radio:

Install the No. 2 radio receiver bracket with the 3 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


b.

w/ Satellite Radio:

Install the No. 2 radio receiver bracket with the 5 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 86211J 3.INSTALL NO. 1 RADIO RECEIVER BRACKET

a.

w/o Satellite Radio:

Install the No. 1 radio receiver bracket with the 3 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


b.

w/ Satellite Radio:

Install the No. 1 radio receiver bracket with the 5 bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 86120L 5.INSTALL NAVIGATION RECEIVER ASSEMBLY

a.

Connect each connector.


b.

Insert the navigation receiver assembly with bracket and attach the 2 guides and 3 clips on its backside.

NOTICE:

When inserting the navigation receiver, do not press its knobs.



c.

Install the navigation receiver assembly with bracket with the 4 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 55900 6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).