| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REPAIR INSTRUCTION | - | ( )
|
- | - |
| 2 | NO. 4 BLACK OUT TAPE | 75928C | ( )
|
- | - |
| 3 | FRONT PILLAR UPPER COVER SUB-ASSEMBLY | 60118 | ( )
|
- | - |
| 4 | WINDSHIELD GLASS | 56111 | - | - | - |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75928C
2.INSTALL NO. 4 BLACK OUT TAPE
| *a | End of R | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 0 to 2.0 mm | B | 0 to 2.0 mm |
| C | 2.5 to 4.5 mm | D | 8.6mm |
Refer to the illustration to position a new No. 4 black out tape.
Remove the release paper and install the No. 4 black out tape.
56111
4.INSTALL WINDSHIELD GLASS