Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT AXLE HUB › 2020.08–2021.07
RM3700E _52 Drivetrain _093736 AXLE AND DIFFERENTIAL _0441810 FRONT AXLE HUB A

AXLE AND DIFFERENTIAL  FRONT AXLE HUB  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
C443137N03
0.219,0.917 1.135,1.083 0.917,0.167 0.177,0.875 1.177,1.125 1,0.25 5.573,2.854 5.823,2.302 5.823,2.302 5.99,2.302 false 4.156,1.396 4.271,1.115 4.271,1.115 4.438,1.115 false 2.219,0.76 2.333,0.479 2.333,0.479 2.5,0.479 false 0.667,0.917 0.667,0.75 0.667,0.75 0.927,0.396 false 6.281,2.167 6.563,2.521 0.281,0.354 18 false 2 4.469,0.948 4.75,1.302 0.281,0.354 18 false 1 2.542,0.396 2.823,0.75 0.281,0.354 10 false *1 0.917,0.448 1.271,0.708 0.354,0.26 10 false x3 0.313,0.927 1.229,1.094 0.917,0.167 8 false 130 (1326, 96)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FRONT DISC BRAKE DUST COVER 47782 - - -
2 FRONT AXLE HUB SUB-ASSEMBLY 43502C (Click here) - -

*1 STEERING KNUCKLE - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - -

C443138N04
6.115,2.354 6.948,2.521 0.833,0.167 4.833,2.49 5.917,2.656 1.083,0.167 4.406,2.76 5.406,3.01 1,0.25 4.448,2.802 5.365,2.969 0.917,0.167 3.917,2.083 4.667,2.25 0.75,0.167 3.875,2.042 4.708,2.292 0.833,0.25 0.083,0.667 1,0.833 0.917,0.167 0.042,0.625 1.042,0.875 1,0.25 0.5,2.927 1.333,3.094 0.833,0.167 0.458,2.885 1.375,3.135 0.917,0.25 6.073,2.313 6.99,2.563 0.917,0.25 1.073,5.156 1.823,5.323 0.75,0.167 1.031,5.115 1.865,5.365 0.833,0.25 4.792,2.448 5.958,2.698 1.167,0.25 1.021,1.698 0.823,1 0.823,1 0.604,1 false 1.49,1.281 1.167,0.75 1.167,0.75 1,0.75 false 2.688,2.104 3.135,0.615 3.135,0.615 3.333,0.615 false 3.438,1.583 3.583,1.208 3.583,1.208 3.781,1.208 false 4.208,3.698 4.271,2.875 4.271,2.875 4.438,2.875 false 1.146,5.521 0.969,5.521 0.969,5.521 0.573,4.302 false 2.563,4.302 2.385,4.302 2.385,4.302 2.229,4.438 false 3.396,5.271 3.229,5.271 3.229,5.271 3.073,3.823 false 4.708,1.333 5.146,1.333 false 6.417,1.073 6.75,1.073 false 6.479,0.635 6.729,0.635 false 5.417,1.885 5.719,1.885 false 3.292,2.563 3.594,2.563 false 6.417,4.917 6.646,4.917 false 6.521,2.021 6.521,2.354 false 0.281,3.188 0.333,3 0.333,3 0.5,3 false 6.521,0.208 6.771,0.208 false 1.833,5.25 2.333,5.25 2.333,5.25 2.333,5.083 false 1.917,5.083 1.917,5.25 false 5.417,2.479 5.417,2.125 false 3.688,2.396 3.75,2.167 3.75,2.167 3.917,2.167 false 0.365,0.865 0.646,1.219 0.281,0.354 18 false 4 1.375,5.385 2.646,5.771 1.271,0.385 18 false 8, 10, 15 2.615,4.167 2.875,4.5 0.26,0.333 18 false 5 3.635,5.115 4.99,5.406 1.354,0.292 18 false 7, 11, 14 6.688,4.729 7.042,5.104 0.354,0.375 18 false 18 5.917,2.719 6.729,3.417 0.813,0.698 18 false 9, 17 3.083,2.479 3.385,2.708 0.302,0.229 10 false ● 0.188,3.302 0.49,3.531 0.302,0.229 10 false x2 1.479,1.375 1.781,1.604 0.302,0.229 10 false x2 2.677,1.26 2.979,1.49 0.302,0.229 10 false x2 3.573,0.448 3.854,0.802 0.281,0.354 18 false 3 4.031,1.052 4.313,1.406 0.281,0.354 18 false 6 5.396,1.177 5.75,1.49 0.354,0.313 18 false 16 5.844,0.948 6.25,1.271 0.406,0.323 18 false 19 6.198,0.51 6.76,0.896 0.563,0.385 18 false 23 5.188,1.802 5.49,2.031 0.302,0.229 10 false *1 6.188,2.354 7.031,2.552 0.844,0.198 8 false 29.4 (300, 22) 4.917,2.49 5.958,2.656 1.042,0.167 8 false 8.5 (87, 75 in.*lbf) 4.51,2.802 5.615,2.979 1.104,0.177 8 false 216 (2203, 159) 3.99,2.104 4.969,2.271 0.979,0.167 8 false 49 (500, 36) 0.156,0.677 1.167,0.896 1.01,0.219 8 false 240 (2447, 177) 0.542,2.938 1.5,3.125 0.958,0.188 8 false 107 (1091, 79) 5.74,2.802 5.99,3.25 0.25,0.448 10 false ● 5.417,0.073 6.667,0.438 1.25,0.365 18 false 12, 13, 21 2.417,4.958 2.719,5.188 0.302,0.229 10 false x2 1.156,5.167 2.052,5.333 0.896,0.167 8 false 89 (908, 66) 6.146,1 6.76,1.198 0.615,0.198 10 false (*A) 5.115,0.51 6.49,0.896 1.375,0.385 18 false 20, 22 5.844,0.573 6.458,0.771 0.615,0.198 10 false (*A),

Procedure Part Name Code
Z101186

Z101188

Z101187

3 FRONT AXLE ASSEMBLY - (Click here) - -
4 FRONT DRIVE SHAFT ASSEMBLY 43420 (Click here) - -
5 FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY 48069 (Click here) - -
6 TIE ROD END SUB-ASSEMBLY 45047 (Click here) - -
7 INSTALL FRONT DISC 43512 (Click here) - -
8 INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY - (Click here) - -
9 INSTALL FRONT AXLE SHAFT NUT 43502H (Click here) - -
10 SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY - (Click here) - -
11 REMOVE FRONT DISC 43512 (Click here) - -
12 INSPECT FRONT AXLE HUB BEARING LOOSENESS - (Click here) - -
13 INSPECT FRONT AXLE HUB RUNOUT - (Click here) - -
14 INSTALL FRONT DISC 43512 (Click here) - -
15 INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY - (Click here) - -
16 FRONT SPEED SENSOR 89543 (Click here) - -
17 STAKE FRONT AXLE SHAFT NUT 43502H (Click here) - -
18 FRONT WHEEL - - - -
19 CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL - - - -
20 INSPECT AND ADJUST FRONT WHEEL ALIGNMENT - - - (Click here)
21 CHECK FOR SPEED SENSOR SIGNAL - (Click here) - -
22 INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL - - - (Click here)
23 PERFORM INITIALIZATION - - - (Click here)

*A for HV Model - -
*1 FRONT FLEXIBLE HOSE - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) ● Non-reusable part
V100135

Toyota Body Grease W
V103638

Do not apply lubricants to the threaded parts ]

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 47782 1.INSTALL FRONT DISC BRAKE DUST COVER

a.
C443136


Hide 43502C 2.INSTALL FRONT AXLE HUB SUB-ASSEMBLY

a.
C443135N02
0.417,0.083 0.938,0.448 0.521,0.365 18 false i, ii

i.

Secure the steering knuckle between aluminum plates in a vise.

NOTICE:

Do not overtighten the vise.



ii.

Using a 12 mm hexagon socket wrench, install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 3 bolts.

Torque:
130 N*m (1326 kgf*cm, 96 ft.*lbf)

NOTICE:
·

Be careful not to damage the speed sensor rotor or contact surfaces.

·

Do not allow foreign matter to contact the speed sensor rotor or contact surfaces.





Hide 3.INSTALL FRONT AXLE ASSEMBLY

a.
C443139C01
1,0.083 1.281,0.438 0.281,0.354 18 false i 3.74,0.073 3.906,0.354 0.167,0.281 18 true ii
V100135

Toyota Body Grease W - -


i.

Apply 0.1 to 0.3 g (0.00353 to 0.0105 oz.) of Toyota Body Grease W to each of the 4 areas shown in the illustration.


ii.

Install the front axle assembly to the front shock absorber assembly with the 2 bolts and 2 nuts.

Torque:
240 N*m (2447 kgf*cm, 177 ft.*lbf)

NOTICE:
·

Do not apply lubricants to the steering knuckle and shock absorber contact surfaces.

·

When installing the nuts, keep the bolts from rotating.



HINT:

The bolts can be installed in either direction, however, make sure that they are both installed in the same direction.




Hide 43420 4.INSTALL FRONT DRIVE SHAFT ASSEMBLY

a.
C443140C01
4.542,0.271 5.323,0.583 5.323,0.583 4.656,0.479 true 0.396,0.063 0.677,0.417 0.281,0.354 18 false i 5.365,0.49 5.604,0.677 0.24,0.188 10 true *a
*a Matchmark - -


i.

Align the matchmarks on the front drive shaft assembly and front axle hub sub-assembly, and connect the front drive shaft assembly to the front axle assembly.

NOTICE:
·

Do not push the front axle assembly towards the outside of the vehicle any further than necessary.

·

Check that there is no foreign matter on the speed sensor rotor or contact surfaces.

·

Do not damage the front drive shaft outboard joint boot.

·

Do not damage the front disc brake dust cover.

·

Do not damage the speed sensor rotor.





Hide 48069 5.CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

Torque:
89 N*m (908 kgf*cm, 66 ft.*lbf)

Hide 45047 6.CONNECT TIE ROD END SUB-ASSEMBLY

Z101186

Click here(Click here)

Hide 43512 7.INSTALL FRONT DISC

Z101186

Click here(Click here)

Hide 8.INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

Z101186

Click here(Click here)

Hide 43502H 9.INSTALL FRONT AXLE SHAFT NUT

a.
C443141N01
0.406,0.063 0.563,0.333 0.156,0.271 18 true i 3.719,0.083 3.927,0.375 0.208,0.292 18 true ii

i.

Clean the threaded parts on the front drive shaft assembly and a new front axle shaft nut using non-residue solvent.

NOTICE:
·

Be sure to perform this work even when using a new front drive shaft assembly.

·

Keep the threaded parts free of oil and foreign matter.




ii.

Using a 30 mm deep socket wrench, while applying the brakes, temporarily install the front axle shaft nut.

Torque:
216 N*m (2203 kgf*cm, 159 ft.*lbf)

NOTICE:

Stake the front axle shaft nut after inspecting for looseness and runout in the following steps.


HINT:

Keep depressing the brake pedal to prevent the front drive shaft from rotating.




Hide 10.SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY

Z101186

Click here(Click here)

Hide 43512 11.REMOVE FRONT DISC

Z101186

Click here(Click here)

Hide 12.INSPECT FRONT AXLE HUB BEARING LOOSENESS

Z101186

Click here(Click here)

Hide 13.INSPECT FRONT AXLE HUB RUNOUT

Z101186

Click here(Click here)

Hide 43512 14.INSTALL FRONT DISC

Z101186

Click here(Click here)

Hide 15.INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

Z101186

Click here(Click here)

Hide 89543 16.INSTALL FRONT SPEED SENSOR

a.
C443142C02
1.906,0.115 2.063,0.417 0.156,0.302 18 true i 0.698,2.042 0.917,2.344 0.219,0.302 18 true ii 3.885,2.052 4.5,2.333 0.615,0.281 18 false iii, iv
V100136

Hook - -


i.

Set the 2 hooks of the front speed sensor to the front shock absorber assembly.

NOTICE:

Do not twist the front speed sensor when installing it.



ii.

Install the front speed sensor and front flexible hose to the front shock absorber assembly with the bolt.

Torque:
29.4 N*m (300 kgf*cm, 22 ft.*lbf)

NOTICE:

Do not twist the front flexible hose when installing it.



iii.

Install the front speed sensor to the steering knuckle with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Prevent foreign matter from attaching to the front speed sensor tip.

·

Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.

·

After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.

·

Do not twist the front speed sensor when installing it.




iv.

Engage the clamp.

NOTICE:

Do not twist the front speed sensor when installing it.




Hide 43502H 17.STAKE FRONT AXLE SHAFT NUT

a.
C443143N01
0.427,0.094 0.708,0.448 0.281,0.354 18 false i

i.

Using a chisel and hammer, stake the front axle shaft nut.



Hide 18.INSTALL FRONT WHEEL

Hide 19.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model)

Hide 20.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Hide 22. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL (for HV Model)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 23.PERFORM INITIALIZATION

Parking support brake system (Click here)
Parking assist monitor system (Click here)
Panoramic view monitor system (Click here)