Home › Brake › BRAKE (FRONT) › FRONT BRAKE › 2020.08–2021.07
RM3700E _54 Brake _093727 BRAKE (FRONT) _0441936 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C445630N01
2.833,3.49 3.75,4.833 0.917,1.344 0.354,2.083 1.333,3.417 0.979,1.333 6.333,0.25 6.667,0.25 false 6.323,0.615 6.656,0.615 false 5.75,2.917 6,2.333 6,2.333 6.167,2.333 false 4.031,1.917 4.365,1.917 false 1.75,3.833 1.75,4.667 false 1.75,4.083 2.333,4.083 false 1.885,1.083 2.219,1.083 false 0.833,3.917 0.833,3.417 false 3.333,5.25 3.333,4.833 false 3.396,1.135 3.729,1.135 false 3.021,0.875 3.354,0.875 false 5.677,0.104 6.24,0.458 0.563,0.354 18 false , 2 6.104,0.49 6.5,0.885 0.396,0.396 18 false 4 6.219,2.198 6.615,2.594 0.396,0.396 18 false 3 3.417,0.75 3.813,1.146 0.396,0.396 18 false 5 4.427,1.792 4.823,2.188 0.396,0.396 18 false 6 1.677,4.729 2.073,5.125 0.396,0.396 18 false 7 0.854,3.938 1.25,4.333 0.396,0.396 18 false 8 3.375,5.323 3.771,5.719 0.396,0.396 18 false 8 3.792,1.073 4.188,1.469 0.396,0.396 10 false ● 1.698,1.021 2.094,1.417 0.396,0.396 10 false ● 2.833,2.094 3.229,2.49 0.396,0.396 10 false x2 5.969,0.177 6.365,0.573 0.396,0.396 12 false (*A) 5.198,0.104 5.76,0.458 0.563,0.354 18 false 1 5.365,0.167 5.76,0.563 0.396,0.396 12 false (*A)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 PRECAUTION - (Click here) - -
2 DISABLE BRAKE CONTROL - (Click here) - -
3 FRONT WHEEL - - - -
4 BRAKE FLUID - - (Click here) -
5 FRONT FLEXIBLE HOSE 47313A (Click here) - -
6 FRONT DISC BRAKE CYLINDER ASSEMBLY 47750 - - -
7 FRONT DISC BRAKE PAD - - - -
8 FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT 04945 - - -

*A for HV Model - -
● Non-reusable part - -

C445631N02
4.292,3.781 5.594,5.427 1.302,1.646 4.99,3.781 5.073,3.49 5.073,3.49 5.24,3.49 false 1.927,2.313 2.042,2.073 2.042,2.073 2.208,2.073 false 1.083,3.552 1.208,3.354 1.208,3.354 1.375,3.354 false 1.396,4.333 1.563,4.333 1.563,4.333 1.729,4.042 false 1.958,4.542 1.958,4.208 false 2.354,3.063 2.354,2.729 false 3.167,4.76 3.167,4.427 false 4.521,0.833 4.156,0.833 false 5.51,3.365 6.063,3.719 0.552,0.354 18 false 9 2.448,1.969 3,2.323 0.552,0.354 18 false 10 1.594,3.26 2.146,3.615 0.552,0.354 18 false 10 0.99,4.26 1.5,4.458 0.51,0.198 10 false ● *1 1.802,4.656 1.958,4.854 0.156,0.198 10 false ● 1.958,4.583 2.51,4.938 0.552,0.354 18 false 11 2.167,3.146 2.323,3.344 0.156,0.198 10 false ● 2.313,3.073 2.865,3.427 0.552,0.354 18 false 11 3.031,4.781 3.583,5.135 0.552,0.354 18 false 12 3.844,0.729 4.396,1.083 0.552,0.354 18 false 13 2.708,3.646 3.021,3.844 0.313,0.198 10 false x2

Procedure Part Name Code
Z101186

Z101188

Z101187

9 FRONT DISC BRAKE PAD SUPPORT PLATE - (Click here) - -
10 FRONT DISC BRAKE CYLINDER SLIDE PIN 47715A (Click here) - -
11 FRONT DISC BRAKE BUSHING DUST BOOT - - - -
12 FRONT DISC BRAKE CYLINDER MOUNTING - - - -
13 FRONT DISC 43512 (Click here) - -

*1 FRONT DISC BRAKE CYLINDER SLIDE BUSHING - -
● Non-reusable part - -

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the front brake removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Auxiliary battery terminal is disconnected/reconnected Memorize steering angle neutral point Parking assist monitor system (Click here)
Panoramic view monitor system (Click here)

NOTICE:
·

Immediately after installing the brake pads, the braking performance may be reduced. Always perform a road test in a safe place while paying attention to the surroundings.

·

After replacing the front disc brake pads, the brake pedal may feel soft due to clearance between the front disc brake pads and front disc. Depress the brake pedal several times until the brake pedal feels firm.

·

After replacing the front disc brake pads, always perform a road test to check the braking performance and check for vibrations.

·

When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC [C13CD00, C13CE00, C140000] may be stored. As there is no malfunction, clear the DTC. (for HV Model)

·

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing the brake system components, do not operate the brake pedal or open/close the doors while the auxiliary battery is connected. (for HV Model)



HINT:
·

When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used. (for HV Model)

-

Learning completes when vehicle is driven

Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link
Lane tracing assist system Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 second or more. (Click here)
Pre-collision system
Parking support brake system

-

Learning completes when vehicle is operated normally

Effect/Inoperative Function When Necessary Procedures are not Performed Necessary Procedures Link
Power door lock control system
·

Back door opener


Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch. (Click here)
Power back door system Fully close the back door by hand.
HINT:

Initialization is not necessary if the above procedures are performed while the back door is closed.


(Click here)
Air conditioning system After the ignition switch is turned to ON, the servo motor standard position is recognized. -


·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1. PRECAUTION (for HV Model)

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY


Hide 2.DISABLE BRAKE CONTROL (for HV Model)

a.
C445632N01
2.063,0.083 2.344,0.438 0.281,0.354 18 false i

i.

After waiting for 2 minutes with the ignition switch is off, perform the following procedure.

NOTICE:

When the brake pedal is depressed or the door courtesy switch is turned on even if the power switch is off, the brake control system activates. Therefore do not depress the brake pedal or open/close the doors until the reservoir level switch connector is disconnected.


1.

Disconnect the reservoir level switch connector.

2.

Disconnect the cable from the negative (-) auxiliary battery terminal.

Click hereGeneral>MAINTENANCE>M15A-FXE AUXILIARY BATTERY>REMOVAL

3.

Check that the brake pedal cannot be further depressed.




Hide 3.REMOVE FRONT WHEEL

Hide 4.DRAIN BRAKE FLUID

Z101186

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.



Hide 47313A 5.DISCONNECT FRONT FLEXIBLE HOSE

a.
C445633


Hide 47750 6.REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY

a.
C445634


Hide 7.REMOVE FRONT DISC BRAKE PAD

a.
C445635


Hide 04945 8.REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

Z101186

Click here(Click here)

Hide 9.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

Z101186

NOTICE:

Each front disc brake pad support plate has a different shape. Be sure to put an identification mark on each front disc brake pad support plate so that it can be reinstalled to its original position.



a.
C445636


Hide 47715A 10.REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN

a.
C445637N01
4.073,0.083 4.354,0.438 0.281,0.354 18 false ii 0.833,0.063 1.115,0.417 0.281,0.354 18 false i

i.

Remove the 2 front disc brake cylinder slide pins from the front disc brake cylinder mounting.


ii.

Using a screwdriver with its tip wrapped with protective tape, remove the front disc brake cylinder slide bushing from the front disc brake cylinder slide pin (lower side).

NOTICE:

Do not damage the front disc brake cylinder slide pin.




Hide 11.REMOVE FRONT DISC BRAKE BUSHING DUST BOOT

a.
C426174


Hide 12.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING

a.
C426175


Hide 43512 13.REMOVE FRONT DISC

a.
C426176C01
3.792,0.896 4.531,1.031 4.531,1.031 3.771,0.823 true 2.104,0.052 2.25,0.396 0.146,0.344 18 true i 4.583,0.958 4.896,1.156 0.313,0.198 10 false *a
*a Matchmark - -


i.

Put matchmarks on the front disc and the front axle hub sub-assembly.


ii.

Remove the front disc.