Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
67914B
2.REMOVE FRONT DOOR SCUFF PLATE LH
62112
3.REMOVE COWL SIDE TRIM BOARD LH
62312B
4.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
53601
7.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
84153
9.REMOVE AUTO HIGH BEAM SWITCH
Using a screwdriver with its tip wrapped with protective tape, disengage the claws to remove the auto high beam switch.