| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | TONNEAU COVER ASSEMBLY | 64910J | - | - | - |
| 2 | DECK BOARD ASSEMBLY | 64771G | - | - | - |
| *A | w/ Deck Board | *B | for Integrated Type |
| *C | for Separate Type | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 3 | SPARE WHEEL COVER | 64771G | - | - | - |
| 4 | SPARE WHEEL CUSHION | 64777J | - | - | - |
| 5 | REAR DECK FLOOR BOX | 64993 | - | - | - |
| 6 | REAR SEAT CUSHION LOCK HOOK | 72693 | - | - | - |
| *A | w/ Cover | *B | w/o Spare Tire |
| *C | w/o Spare Tire | *D | for HV Model AWD |
| *E | for 2WD | - | - |
| ● | Non-reusable part | - | - |
| *A | for HV Model | *B | w/ Plate |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 19 | REAR DOOR SCUFF PLATE INSIDE LH | 67918F | - | - | - |
| 20 | REAR DOOR SCUFF PLATE INSIDE RH | 67917F | - | - | - |
| 21 | REAR DOOR OPENING TRIM WEATHERSTRIP LH | 62332A | - | - | - |
| 22 | REAR DOOR OPENING TRIM WEATHERSTRIP RH | 62331A | - | - | - |
| 23 | LAP BELT OUTER ANCHOR COVER | 73233 | - | - | - |
| 24 | FRONT SEAT OUTER BELT ASSEMBLY LH | 73220 | - | - | - |
| 25 | FRONT SEAT OUTER BELT ASSEMBLY RH | 73210 | - | - | - |
| 26 | CENTER PILLAR LOWER GARNISH LH | 62414A | - | - | - |
| 27 | CENTER PILLAR LOWER GARNISH RH | 62413A | - | - | - |
| 28 | CENTER PILLAR UPPER GARNISH LH | 62412B | - | - | - |
| 29 | CENTER PILLAR UPPER GARNISH RH | 62411B | - | - | - |
| *A | for Gasoline Model | *B | for HV Model |
| *A | w/o Hook | *B | w/ Hook |
| *1 | LUGGAGE HOLD BELT STRIKER ASSEMBLY | - | - |
| *A | w/ Assist Grip | *B | w/o Assist Grip |
| *A | w/ Vanity Light | *B | for TMC Made |
| *C | w/ Pre-collision System | *D | for EC Mirror without Toyota safety Sense |
| *E | w/ Rain Sensor | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 58 | ROOF HEADLINING ASSEMBLY | 63310 | ( )
|
- | - |
| 59 | ROOF HEADLINING ASSEMBLY | 63310 | ( )
|
- | - |
| *A | for Normal Roof | *B | for Panoramic Moon Roof |
| *C | for TMC Made | *D | for TMMF Made |
Refer to Step 9 for the front door scuff plate (w/ Plate) removal procedure.
64910J
1.REMOVE TONNEAU COVER ASSEMBLY
|
Remove in this Direction | - | - |
58410B
2.REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)
| *A | for Integrated Type | *B | for Separate Type |
64771G
3.REMOVE SPARE WHEEL COVER (w/ Cover)
64777J
4.REMOVE SPARE WHEEL CUSHION (w/ Spare Tire)
64993
5.REMOVE REAR DECK FLOOR BOX (w/o Spare Tire)
| *A | for HV Model AWD | *B | for 2WD |
72693
6.REMOVE REAR SEAT CUSHION LOCK HOOK
for 60/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)>REMOVAL
for 40/20/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 40/20/40 Split Seat Type)>REMOVAL
67914B
7.REMOVE FRONT DOOR SCUFF PLATE LH
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
67913B
8.REMOVE FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
67914B
9.REMOVE FRONT DOOR SCUFF PLATE LH (w/ Plate)
Perform this procedure only when replacement of the front door scuff plate LH is necessary.
67913B
10.REMOVE FRONT DOOR SCUFF PLATE RH (w/ Plate)
Perform this procedure only when replacement of the front door scuff plate RH is necessary.
Use the same procedure as for the LH side.
62112
11.REMOVE COWL SIDE TRIM BOARD LH
|
Remove in this Direction | - | - |
62111C
12.REMOVE COWL SIDE TRIM BOARD RH
Use the same procedure as for the LH side.
62312B
13.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62311B
14.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
62211
16.REMOVE FRONT PILLAR GARNISH RH
Use the same procedure as for the LH side.
76974F
17.REMOVE REAR UNDER SIDE COVER LH (for HV Model)
|
Remove in this Direction | - | - |
76973F
18.REMOVE REAR UNDER SIDE COVER RH (for HV Model)
|
Remove in this Direction | - | - |
67918F
19.REMOVE REAR DOOR SCUFF PLATE INSIDE LH
| *A | for Gasoline Model | *B | for HV Model |
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
|
Remove in this Direction (3) |
67917F
20.REMOVE REAR DOOR SCUFF PLATE INSIDE RH
Use the same procedure as for the LH side.
62332A
21.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
62331A
22.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
73233
23.REMOVE LAP BELT OUTER ANCHOR COVER
73220
24.DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
73210
25.DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
62414A
26.REMOVE CENTER PILLAR LOWER GARNISH LH
|
Place Hands Here |
|
Remove in this Direction |
62413A
27.REMOVE CENTER PILLAR LOWER GARNISH RH
Use the same procedure as for the LH side.
62412B
28.REMOVE CENTER PILLAR UPPER GARNISH LH
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
62411B
29.REMOVE CENTER PILLAR UPPER GARNISH RH
Use the same procedure as for the LH side.
58387B
30.REMOVE REAR FLOOR FINISH PLATE
|
Place Hands Here |
|
Remove in this Direction |
81250
31.REMOVE NO. 2 ROOM LIGHT ASSEMBLY
64715C
32.REMOVE DECK TRIM SIDE COVER LH
|
Remove in this Direction | - | - |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to remove the deck trim side cover LH as shown in the illustration.
64714C
33.REMOVE DECK TRIM SIDE COVER RH
Use the same procedure as for the LH side.
64740C
34.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
| *A | w/o Hook | *B | w/ Hook |
| *C | w/ Power Outlet Socket | - | - |
| *1 | LUGGAGE HOLD BELT STRIKER ASSEMBLY | - | - |
|
Remove in this Direction | - | - |
64730B
35.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
Use the same procedure as for the LH side.
61748C
36.REMOVE ROOF SIDE INNER TO WHEEL HOUSE BRACE LH
73370E
37.DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH
73360D
38.DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
62472A
39.REMOVE ROOF SIDE INNER GARNISH LH
|
Remove in this Direction | - | - |
62471A
40.REMOVE ROOF SIDE INNER GARNISH RH
Use the same procedure as for the LH side.
74320
41.REMOVE VISOR ASSEMBLY LH
74310
42.REMOVE VISOR ASSEMBLY RH
Use the same procedure as for the LH side.
74348C
43.REMOVE VISOR HOLDER LH
|
Turn |
|
Remove in this Direction |
74348B
44.REMOVE VISOR HOLDER RH
Use the same procedure as for the LH side.
74612
45.REMOVE ASSIST GRIP COVER
| *a | Cutout | *b | 30 to 45° |
|
Remove in this Direction | - | - |
Insert SST into the cutout of the assist grip cover as shown in the illustration.
To prevent the assist grip sub-assembly from being damaged, make sure to insert SST straight into the cutout.
Pull SST to disengage the claw.
To prevent the assist grip sub-assembly from being damaged, make sure to only pull SST as shown in the illustration.
Remove the assist grip cover as shown in the illustration.
Use the same procedures for the opposite side.
74610S
46.REMOVE ASSIST GRIP ASSEMBLY
|
Remove in this Direction | - | - |
74630E
47.REMOVE REAR ASSIST GRIP ASSEMBLY LH (w/ Assist Grip)
Use the same procedure as for the assist grip assembly.
74620C
48.REMOVE REAR ASSIST GRIP ASSEMBLY RH (w/ Assist Grip)
Use the same procedure as for the assist grip assembly.
49.REMOVE COAT HOOK (w/o Assist Grip)
| *a | Protective Tape | - | - |
81260A
50.REMOVE MAP LIGHT ASSEMBLY
81240
51.REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for TMC Made)
81340
52.REMOVE VANITY LIGHT ASSEMBLY (w/ Vanity Light)
87818
55.REMOVE INNER REAR VIEW MIRROR COVER (for EC Mirror without Toyota Safety Sense)
89943
56.REMOVE RAIN SENSOR COVER (w/ Rain Sensor)
63339A
57.REMOVE ROOF HEADLINING SERVICE HOLE COVER
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a moulding remover B, disengage the claws and guides to remove the roof headlining service hole cover as shown in the illustration.
63310
58.REMOVE ROOF HEADLINING ASSEMBLY (for Normal Roof)
The illustrations are representative examples, and details may differ.
for Front Pillar LH Side:
1. Disconnect each connector.
2. Disengage the clamps.
for Front Pillar RH Side:
1. Disconnect the connector.
2. Disengage the clamps.
for Windshield Glass Side:
1. Disconnect each connector.
for Rear Pillar RH Side:
1. Disconnect the connector.
for Roof Rear Side:
1. Disconnect the connector.
2. Remove the bolt.
3. Disengage the guide to separate the ground wire.
| *A | for TMC Made | *B | for TMMF Made |
|
Remove in this Direction | - | - |
for TMC Made:
1. Remove the 3 clips.
2. Disengage the guides.
for TMMF Made:
1. Remove the 5 clips.
2. Disengage the guides.
Turn the roof headlining assembly diagonally and bend slightly to remove it from the back door as shown in the illustration.
Make sure that wrinkles do not form in the roof headlining assembly during removal.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.
63310
59.REMOVE ROOF HEADLINING ASSEMBLY (for Panoramic Moon Roof)
The illustrations are representative examples, and details may differ.
for Front Pillar LH Side:
1. Disconnect the connector.
2. Disengage the clamps.
for Front Pillar RH Side:
1. Disconnect the connector.
2. Disengage the clamps.
for Windshield Glass Side:
1. Disconnect each connector.
for Rear Pillar RH Side:
1. Disconnect the connector.
for Roof Rear Side:
1. Disconnect the connector.
2. Remove the bolt.
3. Disengage the guide to separate the ground wire.
| *a | Fastener | *b | Guide |
|
Remove in this Direction | - | - |
Remove the 3 clips.
Disengage the guides and fasteners to remove the roof headlining assembly.
Turn the roof headlining assembly diagonally and bend slightly to remove it from the back door as shown in the illustration.
Make sure that wrinkles do not form in the roof headlining assembly during removal.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.