Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD GLASS › from 2021.07
RM3700E _59 Vehicle Exterior _092998 WINDOW / GLASS _0438346 WINDSHIELD GLASS A

WINDOW / GLASS  WINDSHIELD GLASS  INSTALLATION  


CAUTION / NOTICE / HINT

COMPNENTS (INSTALLATION)
B586197N02
4.031,4.26 4.406,4.26 false 6.01,3.469 6.469,3.469 false 0.823,4.813 0.823,5.271 false 6.427,0.229 6.844,0.229 false 2.615,0.906 3.281,0.906 false 2.896,0.542 3.583,0.542 false 2.958,0.552 3.271,0.75 0.313,0.198 10 false x2 2.563,0.927 2.875,1.125 0.313,0.198 10 false x2 4.063,0.375 4.479,0.729 0.417,0.354 18 false 1 3.75,0.771 4.167,1.125 0.417,0.354 18 false 3 3.573,0.844 3.823,1.094 0.25,0.25 10 false ● 1.042,5.292 1.458,5.646 0.417,0.354 18 false 4 4.688,4.156 5.104,4.51 0.417,0.354 18 false 6 6.927,3.333 7.156,3.677 0.229,0.344 18 false 5 6.813,3.406 7.063,3.656 0.25,0.25 10 false ● 0.854,5.365 1.104,5.615 0.25,0.25 10 false ● 6,0.063 6.667,0.417 0.667,0.354 18 false 2, 7 3.885,0.448 4.135,0.698 0.25,0.25 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 1 WINDSHIELD GLASS STOPPER 56115A (Click here) - -
2 CLEAN WINDSHIELD GLASS 56111 (Click here) - -
3 NO. 2 WINDSHIELD GLASS STOPPER 56116C (Click here) - -
4 WINDOW GLASS ADHESIVE DAM 56117A (Click here) - -
5 WINDSHIELD OUTSIDE MOULDING 75533G (Click here) - -
6 INSTALL WINDSHIELD GLASS 56111 (Click here) - -
7 INSPECT FOR LEAK - (Click here) - -

● Non-reusable part - -

B590415N01
1.677,2.146 1.938,2 1.938,2 2.104,2 false 5.76,3.333 6.115,3.333 false 1.698,2.542 2.115,2.542 false 2.521,3.531 2.938,3.531 false 5.531,3.688 5.948,3.688 false 4.677,3.833 5.094,3.833 false 0.885,2.667 1.271,2.667 false 4.354,1.521 4.646,0.802 4.646,0.802 4.833,0.802 false 2.531,4.354 2.74,4.354 2.74,4.354 2.854,4.021 false 2.469,5.063 2.885,5.063 false 1.646,5.177 1.781,5.177 1.781,5.177 1.969,4.906 false 4.385,3.698 4.802,4.052 0.417,0.354 18 false 11 6,3.542 6.417,3.896 0.417,0.354 18 false 11 6.167,3.198 6.5,3.552 0.333,0.354 18 false 12 5.135,0.677 5.552,1.031 0.417,0.354 18 false 8 2.188,2.396 2.604,2.75 0.417,0.354 18 false 9 2.125,1.875 2.542,2.229 0.417,0.354 18 false 10 0.698,2.542 1.115,2.896 0.417,0.354 18 false 9 2.229,4.219 2.646,4.573 0.417,0.354 18 false 14 2.979,3.385 3.385,3.771 0.406,0.385 18 false 13 1.354,5.042 1.677,5.333 0.323,0.292 18 false 11 3.208,4.531 3.552,4.74 0.344,0.208 10 false x2 2.083,3.854 2.427,4.063 0.344,0.208 10 false x2 2.917,4.938 3.24,5.229 0.323,0.292 18 false 12

Procedure Part Name Code
Z101186

Z101188

Z101187

8 ROOF HEADLINING ASSEMBLY 63310 (Click here) - -
9 ASSIST GRIP COVER 74612 - - -
10 ASSIST GRIP ASSEMBLY 74610S - - -
11 VISOR HOLDER LH 74348C - - -
12 VISOR HOLDER RH 74348B - - -
13 VISOR ASSEMBLY LH 74320 - - -
14 VISOR ASSEMBLY RH 74310 - - -

B619107N01
1.917,2.583 3.333,4.083 1.417,1.5 0.417,2.167 1.833,3 1.417,0.833 1.427,0.677 1.99,0.677 false 3.656,0.542 3.99,0.542 false 5.177,2.125 5.51,2.125 false 4.76,4.146 5.125,4.146 false 3.635,2.823 3.635,3.24 false 3.333,1.531 3.875,1.531 false 5.823,0.615 6.24,0.615 false 6.688,1.615 6.521,1.615 6.521,1.615 6.438,1.948 false 2.333,2.979 2.75,2.979 false 2.469,3.729 2.771,3.729 false 1.125,4.063 1.375,4.063 false 0.417,0.26 0.833,0.26 false 0.969,2.615 1.385,2.615 false 4.063,0.458 4.708,0.667 0.646,0.208 10 false ● 4.146,1.427 4.51,1.781 0.365,0.354 18 false 17 1.083,0.521 1.448,0.875 0.365,0.354 18 false 18 6.25,0.479 6.615,0.833 0.365,0.354 18 false 15 4.854,1.99 5.219,2.344 0.365,0.354 18 false 16 4.427,4.021 4.792,4.375 0.365,0.354 18 false 19 6.74,1.521 7.021,1.781 0.281,0.26 10 false ● 3.521,3.271 3.885,3.625 0.365,0.354 18 false 20 2.833,2.844 3.198,3.198 0.365,0.354 18 false 22 2.844,3.604 3.208,3.958 0.365,0.354 18 false 23 1.448,3.927 1.813,4.281 0.365,0.354 18 false 24 0.875,0.115 1.24,0.469 0.365,0.354 18 false 25 1.958,2.594 2.333,2.833 0.375,0.24 12 false *B 0.458,2.177 0.833,2.417 0.375,0.24 12 false *A 0.656,2.448 1.021,2.802 0.365,0.354 18 false 21

Procedure Part Name Code
Z101186

Z101188

Z101187

15 MAP LIGHT ASSEMBLY 81260A - - -
16 FRONT PILLAR GARNISH LH 62212 (Click here) - -
17 FRONT PILLAR GARNISH RH 62211 (Click here) - -
18 FRONT DOOR OPENING TRIM WEATHERSTRIP LH 62312B - - -
19 FRONT DOOR OPENING TRIM WEATHERSTRIP RH 62311B - - -
20 INNER REAR VIEW MIRROR ASSEMBLY 87810 - - -
21 RAIN SENSOR 89943 - - -
22 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY 86401 - - -
23 INSTALL FORWARD RECOGNITION CAMERA 8646C - - -
24 WINDSHIELD WIPER MOTOR AND LINK - - - -
25 ADJUST FORWARD RECOGNITION CAMERA 8646C - - -

*A w/ Rain Sensor *B w/ Pre-collision System
● Non-reusable part - -

CAUTION / NOTICE / HINT

NOTICE:

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, front camera system, lane tracing assist system, road sign assist system, pre-collision system or lighting system may not operate properly due to a difference in the transmissivity or black ceramic border.


PROCEDURE

Hide 56115A 1.INSTALL NO. 1 WINDSHIELD GLASS STOPPER

a.
B586201C01
4.656,1.135 4.74,0.979 false 4.5,1.083 4.813,1.281 0.313,0.198 10 false *1 0.479,0.125 0.76,0.479 0.281,0.354 18 false i
*1 No. 1 windshield glass stopper - -


i.

Install 2 new No. 1 windshield glass stoppers to the vehicle body as shown in the illustration.

NOTICE:

Only 2-piece type windshield glass stoppers are provided as supply parts. Use 2-piece type stoppers as replacements even if 1-piece type stoppers were originally installed.




Hide 56111 2.CLEAN WINDSHIELD GLASS

a.
B590207C02
1.469,0.219 1.75,0.521 0.281,0.302 18 false i 4.594,0.24 4.875,0.542 0.281,0.302 18 false ii 0.948,0.281 1.323,0.521 0.375,0.24 12 false *A
*A When reusing the Windshield Glass - -


i.

When reusing the windshield glass:

1. Using a scraper, remove any remaining adhesive dam and adhesive residue from the windshield glass.

NOTICE:

Be careful not to damage the windshield glass.



ii.

Clean the outer circumference of the windshield glass with a non-residue solvent.

NOTICE:
·

Do not touch the windshield glass surface after cleaning it.

·

Even if using a new windshield glass, clean it with a non-residue solvent.





Hide 56116C 3.INSTALL NO. 2 WINDSHIELD GLASS STOPPER

a.

When reusing the windshield glass:

B586200C01
2.354,0.917 2.552,0.594 false 4.813,0.615 4.594,0.854 true 0.979,0.948 1.521,0.635 1.521,0.635 1.479,1.01 true 1.688,1.01 2.146,0.688 2.146,0.688 2.115,1.063 true 4.646,0.99 5.135,0.625 5.135,0.625 5.115,0.948 true 1.406,1.552 1.76,1.552 false 5.167,1.542 5.469,1.542 false 1.24,0.969 1.521,0.646 true 4.906,0.969 5.125,0.635 false 5.365,0.948 5.792,0.635 5.792,0.635 5.781,0.885 true 2.229,2.083 2.542,2.24 0.313,0.156 10 false *a 2.625,0.49 2.938,0.646 0.313,0.156 10 false *c 2.667,0.99 2.823,1.146 0.156,0.156 10 false a 1.552,0.531 1.865,0.688 0.313,0.156 10 false *b 5.833,0.51 6.146,0.667 0.313,0.156 10 false *b 6.323,0.75 6.479,0.906 0.156,0.156 10 false a 4.854,0.521 5.167,0.677 0.313,0.156 10 false *c 5.208,0.521 5.521,0.677 0.313,0.156 10 false *b 2.208,0.573 2.521,0.729 0.313,0.156 10 false *b 1.802,1.469 2.115,1.625 0.313,0.156 10 false *d 5.51,1.448 5.823,1.604 0.313,0.156 10 false *d 0.844,0.479 1.313,0.885 0.469,0.406 18 false ii 3.354,1.844 3.74,2.177 0.385,0.333 18 false i 4.115,1.844 4.5,2.177 0.385,0.333 18 false i 4.552,0.49 5.021,0.896 0.469,0.406 18 false ii
*a Back Side of Windshield Glass *b Ceramic Notch
*c Windshield Glass Edge Side *d Center of Stopper


i.

Using a brush or sponge, coat the installation area of the No. 2 windshield glass stoppers with glass primer.

NOTICE:
·

Do not apply too much glass primer.

·

Allow the glass primer to dry for 3 minutes or more.

·

Throw away any leftover glass primer.



HINT:

If an area other than specified is coated by accident, wipe off the glass primer with a clean piece of cloth before it dries.



ii.

Install the 2 new No. 2 windshield glass stoppers to the windshield glass as shown in the illustration.

Standard Dimension:
Area Dimension Area Dimension
a 13.7 to 14.7 mm (0.539 to 0.579 in.) - -


NOTICE:
·

Allow the glass primer to dry for 3 minutes or more.

·

Only 2-piece type windshield glass stoppers are provided as supply parts. Use 2-piece type stoppers as replacements even if 1-piece type stoppers were originally installed.





Hide 56117A 4.INSTALL WINDOW GLASS ADHESIVE DAM

a.

When reusing the windshield glass:

B586202C01
1.406,1.26 1.563,1.188 true 5.417,1.396 5.49,1.24 true 0.24,0.104 0.552,0.302 0.313,0.198 10 false *a 1.365,0.656 1.521,0.917 0.156,0.26 18 true ii 2.208,0.073 2.521,0.49 0.313,0.417 18 false i 5.271,0.677 5.427,0.927 0.156,0.25 18 true ii 1.188,1.177 1.385,1.375 0.198,0.198 10 true *b 5.292,1.427 5.49,1.625 0.198,0.198 10 true *b
*a Back Side of Windshield Glass *b Ceramic Notch


i.

Using a brush or sponge, coat the installation area of the window glass adhesive dam with glass primer.

NOTICE:
·

Do not apply too much glass primer.

·

Allow the glass primer to dry for 3 minutes or more.

·

Throw away any leftover glass primer.



HINT:

If an area other than specified is coated by accident, wipe off the glass primer with a clean piece of cloth before it dries.



ii.

Install a new window glass adhesive dam to the windshield glass as shown in the illustration.



Hide 75533G 5.INSTALL WINDSHIELD OUTSIDE MOULDING

a.

When reusing the windshield glass:

B586203C01
3.208,3.167 2.948,3.063 true 0.906,3.156 1.167,3.042 true 0.542,0.521 0.854,0.677 0.313,0.156 10 false *a 3.271,3.521 3.583,3.677 0.313,0.156 10 false b 2.365,0.396 2.51,0.552 0.146,0.156 10 false A 2.375,0.802 2.521,0.958 0.146,0.156 10 true A 4.469,1.083 4.813,1.24 0.344,0.156 10 false A-A 5.771,1.188 5.917,1.344 0.146,0.156 10 false a 0.49,0.167 0.938,0.563 0.448,0.396 18 false i 2.938,2.5 3.156,2.781 0.219,0.281 18 true iii 0.635,2.5 0.833,2.771 0.198,0.271 18 true iii 5.969,0.885 6.438,1.281 0.469,0.396 18 false ii 0.823,3.5 1.135,3.656 0.313,0.156 10 false b 1.198,2.948 1.406,3.125 0.208,0.177 10 true *b 2.75,2.969 2.927,3.135 0.177,0.167 10 true *b
*a Back Side of Windshield Glass *b Windshield Glass Edge Side


i.

Using a brush or sponge, coat the installation area of the windshield outside moulding with glass primer.

NOTICE:
·

Do not apply too much glass primer.

·

Allow the glass primer to dry for 3 minutes or more.

·

Throw away any leftover glass primer.



HINT:

If an area other than specified is coated by accident, wipe off the glass primer with a clean piece of cloth before it dries.



ii.

Install a new windshield outside moulding to the windshield glass as shown in the illustration.

Standard Dimension:
for TMC Made:
Area Dimension Area Dimension
a 1.15 to 2.65 mm (0.0453 to 0.104 in.) b 6.2 to 10.8 mm (0.244 to 0.425 in.)

for TMMF Made:
Area Dimension Area Dimension
a 1.15 to 2.65 mm (0.0453 to 0.104 in.) b 7.5 to 8.5 mm (0.295 to 0.335 in.)




Hide 56111 6.INSTALL WINDSHIELD GLASS

a.
B590229C01
0.49,0.146 1.865,0.5 1.375,0.354 18 false i
V100155

Adhesive - -


i.

Clean and shape the contact surface of the vehicle body by the below procedure.

1. Using a knife, cut away excess adhesive on the contact surface of the vehicle body as shown in the illustration.

NOTICE:

Leave as much adhesive on the vehicle body as possible.


2. Clean the contact surface of the vehicle body with a piece of cloth saturated with non-residue solvent.



b.
B586204C01
3.354,1.229 3.688,1.229 3.688,1.229 3.208,1.458 true 2.25,1.125 3.177,0.854 true 3.927,0.885 4.854,0.615 true 3.729,1.146 3.948,1.313 0.219,0.167 10 true *a 0.51,0.146 0.781,0.5 0.271,0.354 18 false i 4.938,0.552 5.167,0.75 0.229,0.198 10 true *b 2.042,1.083 2.354,1.281 0.313,0.198 10 false *b
*a Matchmark *b Suction Cup


i.

Prepare to install the windshield glass sub-assembly by the below procedure.

1. Using suction cups, place the windshield glass in the correct position.

2. Check that the whole contact surface of the windshield glass rim is perfectly even.

3. Align the matchmarks on the windshield glass and vehicle body.

NOTICE:

Check that the windshield glass stoppers are engaged to the vehicle body correctly.


4. Remove the windshield glass.

5. Using a brush, coat the installation surface on the vehicle body with body primer.

NOTICE:
·

Do not coat the adhesive with body primer.

·

Do not apply too much body primer.

·

Allow the body primer to dry for 3 minutes or more.

·

Throw away any leftover body primer.



HINT:

If an area other than specified is coated by accident, wipe off the body primer with a clean piece of cloth before it dries.




c.
B586205C01
6.063,4.146 6.323,4 false 6.385,3.906 6.698,4.063 0.313,0.156 10 false *1 5.76,0.146 5.917,0.302 0.156,0.156 10 false a 0.708,0.99 1.021,1.146 0.313,0.156 10 false *a 4.573,0.25 4.896,0.417 0.323,0.167 10 false A-A 2.323,1.365 2.479,1.521 0.156,0.156 10 false B 2.313,1.708 2.438,1.865 0.125,0.156 10 true B 3.063,1.646 3.219,1.802 0.156,0.156 10 true A 3.052,1.292 3.208,1.448 0.156,0.156 10 false A 3.438,1.802 3.594,1.958 0.156,0.156 10 false C 3.094,1.896 3.25,2.052 0.156,0.156 10 true C 3.385,2.729 3.51,2.896 0.125,0.167 10 true D 3.5,3.083 3.656,3.24 0.156,0.156 10 false D 4.594,1.177 4.917,1.344 0.323,0.167 10 false B-B 4.573,2.365 4.896,2.531 0.323,0.167 10 false C-C 4.604,3.688 4.927,3.854 0.323,0.167 10 false D-D 5.729,1.156 5.885,1.313 0.156,0.156 10 false b 5.719,2.333 5.875,2.49 0.156,0.156 10 false c 5.708,3.646 5.865,3.802 0.156,0.156 10 false d 0.49,0.24 0.771,0.594 0.281,0.354 18 false i
*1 Window Glass Adhesive Dam - -
*a Back Side of Windshield Glass - -
V100155

Glass Primer - -


i.

Using a brush or sponge, coat the adhesive application area with glass primer as shown in the illustration.

Standard Dimension:
Area Dimension Area Dimension
a 11 mm (0.433 in.) or more b 11 mm (0.433 in.) or more
c 11 mm (0.433 in.) or more d 19 mm (0.748 in.) or more


NOTICE:
·

Do not apply too much glass primer.

·

Allow the glass primer to dry for 3 minutes or more.

·

Throw away any leftover glass primer.



HINT:
·

Apply glass primer to the ceramic notches.

·

If an area other than specified is coated by accident, wipe off the glass primer with a clean piece of cloth before it dries.





d.
B582006C02
3.188,0.271 3.063,0.344 false 4.427,0.406 4.854,0.156 true 3.24,0.177 3.552,0.333 0.313,0.156 10 false *b 0.479,0.104 0.781,0.406 0.302,0.302 18 false i 2.417,0.479 2.729,0.635 0.313,0.156 10 false a 2.615,0.906 2.927,1.063 0.313,0.156 10 false b 2.969,0.729 3.281,0.885 0.313,0.156 10 false b 3.167,1.323 3.479,1.479 0.313,0.156 10 false a 4.896,0.083 5.208,0.281 0.313,0.198 10 false *a
*a Sealer Gun *b Cartridge Nozzle
V100155

Adhesive - -


i.

Prepare to apply adhesive to the windshield glass sub-assembly by the below procedure.

Adhesive:

Toyota Genuine Windshield Glass Adhesive (High modulus type) or equivalent


1. Cut off the tip of the cartridge nozzle as shown in the illustration.

Standard Dimension:
Area Dimension Area Dimension
a 12.0 to 15.0 mm (0.472 to 0.591 in.) b 8.0 to 11.0 mm (0.315 to 0.433 in.)


2. Load the sealer gun with the cartridge.



e.
B586206C01
5.865,4.135 6.125,4 false 6.188,3.938 6.5,4.094 0.313,0.156 10 false *1 4.573,0.292 4.99,0.438 0.417,0.146 10 false A-A 0.688,1.083 1,1.24 0.313,0.156 10 false *a 3.438,1.792 3.594,1.948 0.156,0.156 10 false C 3.521,3.094 3.677,3.25 0.156,0.156 10 false D 3.406,2.729 3.51,2.885 0.104,0.156 10 true D 3.115,1.885 3.271,2.042 0.156,0.156 10 true C 3.083,1.635 3.219,1.802 0.135,0.167 10 true A 3.052,1.281 3.188,1.448 0.135,0.167 10 false A 2.313,1.708 2.448,1.875 0.135,0.167 10 true B 2.313,1.354 2.448,1.521 0.135,0.167 10 false B 5.667,0.156 5.823,0.333 0.156,0.177 10 false a 5.677,1.177 5.833,1.354 0.156,0.177 10 false b 5.406,2.354 5.563,2.531 0.156,0.177 10 false c 5.708,3.594 5.865,3.771 0.156,0.177 10 false d 4.594,1.302 5.01,1.448 0.417,0.146 10 false B-B 4.573,2.427 4.99,2.573 0.417,0.146 10 false C-C 4.573,3.688 4.99,3.833 0.417,0.146 10 false D-D 0.5,0.271 0.781,0.625 0.281,0.354 18 false i
*1 Window Glass Adhesive Dam - -
*a Back Side of Windshield Glass - -
V100155

Adhesive - -


i.

Apply adhesive to the windshield glass as shown in the illustration.

Standard Dimension:
Area Dimension Area Dimension
a 9.5 mm (0.374 in.) b 9.5 mm (0.374 in.)
c 9.5 mm (0.374 in.) d 4.0 mm (0.157 in.)




f.
B586207C01
3.24,1.417 3.708,1.313 3.708,1.313 3.333,1.25 true 3.24,0.854 2.188,1.156 true 4.927,0.594 3.948,0.917 true 0.5,0.135 0.781,0.49 0.281,0.354 18 false i 3.729,1.219 3.969,1.438 0.24,0.219 10 true *a 4.958,0.51 5.177,0.708 0.219,0.198 10 true *b 2.021,1.083 2.333,1.281 0.313,0.198 10 false *b
*a Matchmark *b Suction Cup


i.

Install the windshield glass by the below procedure.

1. Using suction cups, position the windshield glass so that the matchmarks are aligned, and press it in gently along the rim.

NOTICE:
·

Check that the windshield glass stoppers are engaged to the vehicle body correctly.

·

Check the clearance between the vehicle body and windshield glass.



2. Lightly press the outer surface of the windshield glass to ensure that the windshield glass is securely fit to the vehicle body.

HINT:

Press the glass with a force of 98 N (10 kgf, 22.0 lbf) or more.


3. Using a scraper, remove any excess or protruding adhesive.

4. Hold the windshield glass using protective tape until the applied adhesive becomes hard.

NOTICE:

Follow the instructions supplied by the adhesive manufacturer or in the corresponding instruction manual for the minimum amount of time necessary to wait before driving the vehicle.




g.

w/ windshield deicer:

B605897

i.

Connect the connector.



Hide 7.INSPECT FOR LEAK

a.
B586208N01
0.5,0.135 1.115,0.563 0.615,0.427 18 false i

i.

Inspect for leaks by the below procedure.

1. After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.

2. If water leaks into the cabin, allow the water to dry and add adhesive.

3. Remove the protective tape.



Hide 63310 8.INSTALL ROOF HEADLINING ASSEMBLY

a.
B586188N01
0.448,0.104 0.729,0.458 0.281,0.354 18 false i

i.

Return the front section of the roof headlining assembly to its original position.

NOTICE:

Do not damage the roof headlining assembly or vehicle interior.




Hide 74612 9.INSTALL ASSIST GRIP COVER

Hide 74610S 10.INSTALL ASSIST GRIP ASSEMBLY

Hide 74348C 11.INSTALL VISOR HOLDER LH

Hide 74348B 12.INSTALL VISOR HOLDER RH

Hide 74320 13.INSTALL VISOR ASSEMBLY LH

Hide 74310 14.INSTALL VISOR ASSEMBLY RH

Hide 81260A 15.INSTALL MAP LIGHT ASSEMBLY

Hide 62212 16.INSTALL FRONT PILLAR GARNISH LH

Z101186

Click here(Click here)

Hide 62211 17.INSTALL FRONT PILLAR GARNISH RH

Hide 62311B 18.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 62312B 19.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 89943 21.INSTALL RAIN SENSOR (w/ Rain Sensor)

Hide 86401 22.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY (w/ Pre-collision System)

Hide 8646C 23.INSTALL FORWARD RECOGNITION CAMERA (w/ Pre-collision System)

Hide 24.INSTALL WINDSHIELD WIPER MOTOR AND LINK

Hide 8646C 25.ADJUST FORWARD RECOGNITION CAMERA (w/ Pre-collision System)

a.

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

HINT:

Forward Recognition Camera Learning can be performed by using either Target Adjustment (One Time Recognition) or Target Adjustment (Sequential Recognition) or Driving Adjustment.