Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB › from 2014.07
RM19S0E _52 Drivetrain _051470 AXLE AND DIFFERENTIAL _0248212 REAR AXLE HUB A

AXLE AND DIFFERENTIAL  REAR AXLE HUB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side as for the LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 42450B 1.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

a.

Install the axle hub and bearing onto the axle beam with the 4 bolts.

Torque:
90 N*m (918 kgf*cm, 66 ft.*lbf)


Hide 89516D 4.CONNECT SKID CONTROL SENSOR WIRE (w/ ABS)

Hide 42403 5.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

Hide 6.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)