Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › KNEE AIRBAG ASSEMBLY
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248318 KNEE AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  KNEE AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 73900 1.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

With the lower No. 1 instrument panel airbag assembly installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the instrument panel with a new one: Any cuts, minute cracks or marked discoloration on the lower No. 1 instrument panel airbag assembly.


Hide 73900 2.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)

CAUTION:

For lower No. 1 instrument panel airbag assembly removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>KNEE AIRBAG ASSEMBLY>INSTALLATION, and carefully follow the correct procedure.



b.
B287814

With the lower No. 1 instrument panel airbag assembly removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the lower No. 1 instrument panel airbag assembly, instrument panel or instrument panel reinforcement with new ones:

·

Any cuts, minute cracks or marked discoloration on the lower No. 1 instrument panel airbag assembly.


·

Any cracks or other damage to the connector.


·

Deformation or cracks on the instrument panel or instrument panel reinforcement.