53630
1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
Engage the grommet.
| *1 | Hood Lock Control Cable Assembly | *2 | Clamp |
| *3 | Grommet | - | - |
Engage the hood lock control cable assembly to the 3 clamps as shown in the illustration and install it.
53510
2.INSTALL HOOD LOCK ASSEMBLY
Apply MP grease to the sliding areas of the hood lock assembly.
Engage the guide and connect the hood lock control cable assembly.
Install the hood lock assembly with the 3 bolts.
53301
3.INSPECT HOOD SUB-ASSEMBLY (for Sedan)
53301
4.INSPECT HOOD SUB-ASSEMBLY (for Hatchback)
53301
5.ADJUST HOOD SUB-ASSEMBLY
53141F
6.INSTALL RADIATOR COVER (for Sedan)
53141F
7.INSTALL RADIATOR COVER (for Hatchback)
53876A
8.INSTALL FRONT FENDER LINER LH
9.INSTALL FRONT WHEEL LH
53601
10.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
Engage the 3 guides and the claw, and install the hood lock control lever sub-assembly.
55432B
11.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
55606
12.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY