12101
1.REMOVE OIL PAN SUB-ASSEMBLY
15104
2.REMOVE OIL STRAINER SUB-ASSEMBLY
16100
3.REMOVE ENGINE WATER PUMP ASSEMBLY
15671
4.REMOVE OIL FILTER BRACKET
13471
5.REMOVE CRANKSHAFT PULLEY
11302R
6.REMOVE TIMING GEAR COVER TIGHT PLUG
7.REMOVE CYLINDER BLOCK DRAIN COCK PLUG
16620D
8.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
11310
9.REMOVE TIMING CHAIN COVER SUB-ASSEMBLY
Remove the 12 bolts from the timing chain cover sub-assembly.
| *a | Protective Tape |
Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and cylinder head sub-assembly or cylinder block sub-assembly with a screwdriver as shown in the illustration.
Be careful not to damage the contact surfaces of the cylinder head sub-assembly, cylinder block sub-assembly and timing chain cover sub-assembly.
Tape the screwdriver tip before use.
Remove the oil pump gasket from the cylinder block sub-assembly.
12205B
10.REMOVE VENTILATION CASE SUB-ASSEMBLY
11.REMOVE STUD BOLT
11302A
12.REMOVE TIMING CHAIN COVER OIL SEAL