Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Gasoline Model LHD) › 2020.09–2021.11
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0432261 BRAKE PEDAL(for Gasoline Model LHD) N

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for Gasoline Model LHD)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT AND ADJUST BRAKE PEDAL HEIGHT



c.

Turn back floor carpet.


d.

Turn back dash panel insulator assembly.


e.

Check the brake pedal height.

HINT:

Inspect and adjust the brake pedal height with the tibia pad folded back.


i.

Measure the shortest distance between the brake pedal pad surface and floor panel as shown in the illustration.

C436695C01
5.583,1.146 5.813,0.938 false 1.208,1.417 0.563,1.833 true 2.719,1.25 2.948,1.438 0.229,0.188 10 true *a 0.25,1.719 0.542,1.938 0.292,0.219 10 true *1 5.833,1.865 6.063,2.052 0.229,0.188 10 true *a 5.865,0.823 6.094,1.01 0.229,0.188 10 true *1
*1 Brake Pedal Pad - -
*a Brake Pedal Height - -
V100155

Measuring Plane of Floor Panel - -


Brake Pedal Height from Floor Panel:

157.8 to 173.8 mm (6.21 to 6.84 in.)


If the pedal height is not as specified, adjust the brake pedal height according to the procedure below.



f.

Adjust the brake pedal height.

i.
C436706C01
1.313,4.177 1.875,4.031 true 2.281,1.365 2.615,1.365 false 1.469,2.188 1.469,1.854 false 2.646,1.271 2.958,1.427 0.313,0.156 10 false *1 1.417,2.198 1.729,2.354 0.313,0.156 10 false *2 2.292,3.604 2.604,3.76 0.313,0.156 10 false *a 1.125,4.083 1.438,4.24 0.313,0.156 10 false *3
*1 Stop Light Switch Assembly
*2 Clevis Lock Nut
*3 Floor Panel
*a Brake Pedal Height


Remove the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>REMOVAL


ii.

Loosen the clevis lock nut.


iii.

Adjust the brake pedal height by turning the push rod.

Brake Pedal Height from Floor Panel:

157.8 to 173.8 mm (6.21 to 6.84 in.)



iv.

Tighten the clevis lock nut.

Torque:
for TMC Made : 26 N*m (265 kgf*cm, 19 ft.*lbf)
for TMMF Made : 15 N*m (153 kgf*cm, 11 ft.*lbf)


v.

Install the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION



g.

Install the dash panel insulator assembly.


h.

Install the floor carpet.




Hide 2.INSPECT BRAKE PEDAL FREE PLAY

a.

Stop the engine and firmly depress the brake pedal several times until no vacuum is left in the brake booster assembly.


b.
C132708C04
2.177,1.542 2.781,1.885 0.604,0.344 10 *a
*a Brake Pedal Free Play


Depress the brake pedal until a slight resistance is felt. Measure the brake pedal free play as shown in the illustration.

Brake Pedal Free Play:

1.0 to 6.0 mm (0.0394 to 0.236 in.)


If the pedal free play is not as specified, check the stop light switch clearance.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION

If the pedal free play is as specified, proceed to the Inspect Brake Pedal Reserve Distance procedure.


Hide 3.INSPECT BRAKE PEDAL RESERVE DISTANCE



c.

Turn back floor carpet.


d.

Turn back dash panel insulator assembly.


e.

With the engine running, depress the brake pedal and measure the brake pedal reserve distance as shown in the illustration.

C436697C01
1.417,1.083 1.031,1.448 true 5.479,1.292 5.844,0.948 true 0.802,1.344 1.021,1.542 0.219,0.198 10 true *1 5.875,0.802 6.094,1 0.219,0.198 10 true *1 6.125,2.01 6.344,2.208 0.219,0.198 10 true *a 2.698,1.146 2.917,1.344 0.219,0.198 10 true *a
*1 Brake Pedal Pad - -
*a Brake Pedal Reserve Distance - -
V100155

Measuring Plane of Floor Panel - -


Brake Pedal Reserve Distance from Floor Panel at 300 N (31 kgf, 67.4 lbf):
for M15A-FKS:

82 mm (3.23 in.) or more

for 1KR-FE:

84 mm (3.31 in.) or more

for G16E-GTS:

100 mm (3.94 in.) or more


If the distance is not as specified, troubleshoot the brake system.

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE SYSTEM (for Gasoline Model)>PROBLEM SYMPTOMS TABLE


f.

Install the dash panel insulator assembly.


g.

Install the floor carpet.