Home › Engine / Hybrid System › G16E-GTS (LUBRICATION) › OIL PUMP › from 2020.09
RM36W0E _51 Engine / Hybrid System _095911 G16E-GTS LUBRICATION _0449904 OIL PUMP A

G16E-GTS LUBRICATION  OIL PUMP  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEELS

Hide 51441C 2.REMOVE ENGINE UNDER COVER RH

Hide 51410 3.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 16361A 4.REMOVE FAN AND GENERATOR V BELT

Hide 88310 5.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

Hide 17361J 6.REMOVE NO. 1 AIR TUBE

a.
A474242

remove the 2 bolts.


b.

Loosen the 2 hose clamps to remove the No. 1 air tube from the No. 2 air hose and No. 3 air hose.


Hide 17342D 7.REMOVE NO. 2 AIR HOSE

a.
A474243

Loosen the hose clamp to remove the No. 2 air tube from the turbocharger sub-assembly.


Hide 82121 8.REMOVE ENGINE WIRE

a.
A474244

Remove the bolt and disengage the engine wire from the timing chain cover assembly.


Hide 16620D 9.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

Hide 11336A 10.REMOVE TIMING GEAR COVER INSULATOR

a.
A474245

Remove the timing gear cover insulator from the timing chain cover assembly.


Hide 11310 12.REMOVE TIMING CHAIN COVER ASSEMBLY

a.
A474246

Remove the 12 bolts and seal washer.


b.

Remove the timing chain cover sub-assembly by prying between the timing chain cover sub-assembly and oil pan sub-assembly, cylinder block sub-assembly with a screwdriver with its tip wrapped with protective tape.

A474247


c.
A474248

Remove the oil pump gasket from the cylinder block sub-assembly.

NOTICE:

Be careful not to damage the contact surfaces of the oil pan sub-assembly.



Hide 11301C 13.REMOVE TIMING CHAIN COVER OIL SEAL