1.ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake)
for TMC Made:
Click hereBrake>BRAKE (REAR)>REAR BRAKE (for TMC Made)>INSTALLATION
for TMMF Made:
Click hereBrake>BRAKE (REAR)>REAR BRAKE (for TMMF Made)>INSTALLATION
2.ADJUST PARKING BRAKE SHOE CLEARANCE (for Rear Disc Brake)
Remove the rear wheels.
Temporarily install the hub nuts.
Secure the rear disc with the hub nuts.
Remove the parking brake shoe adjusting hole plug.
|
Expand |
|
Contract |
Turn the parking brake shoe adjuster and expand the shoes until the rear disc locks.
Turn and contract the parking brake shoe adjuster until the rear disc can rotate smoothly.
Returns 8 notches
Check whether the parking brake drags or not.
Install the parking brake shoe adjusting hole plug.
Remove the hub nuts.
Install the rear wheels.
3.INSPECT PARKING BRAKE LEVER TRAVEL
Pull the parking brake lever to fully engage the parking brake.
Release the parking brake lever to disengage the parking brake.
Slowly pull the parking brake lever using the specified force, and count the number of clicks.
5 to 8 clicks
If the parking brake lever travel is not as specified, adjust the parking brake lever travel.
4.ADJUST PARKING BRAKE LEVER TRAVEL
for 5 Door TMC Made:
Remove the upper No. 1 console support bracket.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL
for 5 Door TMMF Made HV Model:
Remove the upper No. 1 console support bracket.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL
for 5 Door TMMF Made Gasoline Model:
Remove the console rear end panel sub-assembly.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL
for 3 Door:
Remove the console rear end panel sub-assembly.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 3 Door)>REMOVAL
Completely release the parking brake lever.
| *1 | No. 1 Wire Adjusting Nut |
Turn the No. 1 wire adjusting nut until the parking brake lever travel is corrected to within the specified range.
5 to 8 clicks
If the No. 1 wire adjusting nut has been removed from the rod, replace it with a new one.
Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
Check whether the parking brake drags or not.
for 5 Door TMC Made:
Install the upper No. 1 console support bracket.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>INSTALLATION
for 5 Door TMMF Made HV Model:
Install the upper No. 1 console support bracket.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>INSTALLATION
for 5 Door TMMF Made Gasoline Model:
Install the console rear end panel sub-assembly.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>INSTALLATION
for 3 Door:
Install the console rear end panel sub-assembly.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 3 Door)>INSTALLATION
5.INSPECT PARKING BRAKE WARNING LIGHT
When operating the parking brake lever, check that the parking brake warning light illuminates.
Parking brake warning light always illuminates at the first click.