Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER (for RHD) › from 2020.09
RM36W0E _52 Drivetrain _089426 CLUTCH _0430796 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK

Hide 55815E 2.REMOVE NO. 1 FRONT VENTILATOR SEAL

Hide 55701J 4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

Hide 5.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 55225 6.REMOVE DASH PANEL HEAT INSULATOR (for G16E-GTS)

Hide 31434E 7.DISCONNECT NO. 1 CLUTCH RESERVOIR HOSE

a.
C431237

Slide the hose clip and disconnect the No. 1 clutch reservoir hose from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31481 8.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C431238

Using a 10 mm union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 55606 9.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 31453A 11.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN

Hide 31410 12.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C431520

Remove the 2 nuts and clutch master cylinder assembly from the vehicle body.


b.

Remove the clutch master cylinder gasket from the clutch master cylinder assembly.