DTC C1420 Acceleration Sensor Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1420 | After the difference between GL1 and GL2 becomes 0.6 G or more with the vehicle stationary, the difference remains 0.4 G or more for 60 seconds or more. |
|
| 1.CHECK YAW RATE AND ACCELERATION SENSOR INSTALLATION |
Check that the yaw rate and acceleration sensor has been installed properly.
| Result | Proceed to |
| DTC is not output | A |
| DTC is output (for Sedan) | B |
| DTC is output (for Hatchback) | C |
|
| ||||
|
| ||||
| A | |
| 2.REPLACE YAW RATE AND ACCELERATION SENSOR |
Replace the yaw rate and acceleration sensor.
| NEXT | ||
| ||