[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| Trouble symptom | Inspection Procedure No. | Reference page | |
| The ignition switch (ACC) signal is not received. | 1 |  | |
| The ignition switch (IG1) signal is not received. | 2 | | |
| The key reminder switch signal is not received. <Vehicles without KOS> | 3 | | |
| The front door lock actuator (driver’s side) signal is not received. | 4 | | |
| The front door switch (driver’s side) signal is not received. | 5 | | |
| The front door switch (passenger’s side) signal is not received. | 6 | | |
| The rear door switch (RH) signal is not received. | 7 | | |
| The rear door switch (LH) signal is not received. | 8 | | |
| The tailgate lock actuator signal is not received. | 9 | | |
| The hazard warning lamp switch signal is not received. | 10 | | |
| The column switch signal is not received. | 11 | | |
| The stop lamp switch signal is not received. | 12 | | |
| The remote controlled mirror switch (fold switch) signal is not received. | 13 | | |
| The ASC OFF switch signal is not received. | 14 | | |
| The hood latch switch signal is not received. | 15 | | |
| The LDW switch signal is not received. | 16 | | |
| The Cruise control switch (ACC distance switch) signal is not received. | 17 | | |
| The ECO mode switch signal is not received. | 18 | | |
| The back-up lamp switch <M/T> or inhibitor switch <CVT> signal is not received. | 19 | | |
| The washer fluid level switch signal is not received. | 20 | | |
| The door lock switch (incorporated with the power window main switch) signal is not received. | 21 | | |