Visual Inspection
Precautions: Precautions for Diagnosing Trouble · Precautions for RBS System · Precautions for Servicing RBS System · Precautions for Removing / Installing and Replacing RBS Control Module · Precautions for Control Systems · General safety (00)
Visually check the following parts and systems.
NOTE:
With the radiator grill installed, the millimeter wave radar cover cannot be removed. It is necessary to remove the radiator grill for visual inspection of the millimeter wave radar device (RBS control module).
| Inspection item | Referring section |
|---|---|
|
•Battery – Fluid level, corrosion of terminal
|
•M16A model: Battery Inspection:M16A
•K14C model: Battery Inspection:K14C •D16AA model: Battery Inspection:D16AA |
|
•Connectors of electric wire harness – Disconnection, friction
|
Intermittent Connection and Poor Contact Inspection |
|
•Fuses – Blown
|
— |
|
•Master warning indicator light – Operation
|
Operation Table of Indicator Light / Information Display / Buzzer |
|
•RBS indicator light – Operation
|
|
|
•RBS OFF light – Operation
|
|
|
•Radiator grill and millimeter wave radar cover (in front of millimeter wave radar) – Looseness, coming off
|
Front Bumper Removal and Installation |
|
•Radiator grill and millimeter wave radar cover (in front of millimeter wave radar) – soil, damage, adhesion of sticker or film, coloring or painting
|
— |
|
•RBS control module – Soil on millimeter wave radar surface
|
— |
|
•RBS control module – Deformation, damage
|
Millimeter Wave Radar Aiming Adjustment |
|
•RBS control module bracket – Deformation, damage
|
Millimeter Wave Radar Aiming Adjustment |
|
•Vehicle posture
|
Suspension System Check |