10J Radar Brake Support System
Precautions
- Precautions for Diagnosing Trouble
- Precautions for RBS System
- Precautions for Servicing RBS System
- Precautions for Removing / Installing and Replacing RBS Control Module
General Description
- RBS System Description
- Description of RBS System Components
- Description of RBS Function
- Operation Table of Indicator Light / Information Display / Buzzer
Schematic and Routing Diagram
Component Location
Diagnostic Information and Procedures
- RBS System Check
- RBS Control Module Self-Diagnosis Function
- DTC Check
- DTC Clearance
- DTC Table
- Fail-Safe Table
- Scan Tool Data
- Visual Inspection
- RBS System Symptom Diagnosis
- DTC C1600 Control Module Performance
- DTC C1610 Sensor Not Aligned; C1618 Sensor Misaligned
- DTC C1620 CAN Invalid Data From ECM
- DTC C1621 CAN Invalid Data From TCM
- DTC C1630 CAN Invalid Data From ABS / ESP® Control Module
- DTC C1631 CAN Invalid Data From Steering Angle Sensor
- DTC C1638 RBS OFF Switch Circuit
- DTC C1639 Communication Error From RBS Control Module To ABS / ESP® Control Module
- DTC C1640 RBS Control Temporary Inhibition
- DTC C1650 Steering Angle Midpoint Misadjustment
- DTC C1651 Yaw Rate Midpoint Misadjustment; C1654 Yaw Rate Sensor Circuit
- DTC C1652 Wheel Speed Sensor Calculation Performance; C1653 Wheel Speed Sensor Circuit
- DTC U0073 Troubleshooting for Communication Bus Off
- DTC U0100 Troubleshooting for Lost Communication
- DTC U0101 Troubleshooting for Lost Communication
- DTC U0121 Troubleshooting for Lost Communication
- DTC U0126 Troubleshooting for Lost Communication
- DTC U0140 Troubleshooting for Lost Communication
- DTC U0155 Troubleshooting for Lost Communication
- DTC U1082 Troubleshooting for Lost Communication
- Inspection of RBS Control Module and Its Circuits
Repair Instructions
- RBS Control Module Components
- RBS Control Module Removal and Installation
- Millimeter Wave Radar Aiming Adjustment
- RBS OFF Switch and FAR/NEAR Setting Switch Removal and Installation
- RBS OFF Switch and FAR/NEAR Setting Switch Inspection