| Reference |
Specification |
|
Low side and high side pressure example. Gauges should read as follows when ambient temperature is 30 °C (86 °F) |
|
Amount of oil in compressor |
|
Amount of compressor oil to be replenished |
|
Specified amount of refrigerant |
|
Low pressure side and high pressure side example |
|
Specified amount of refrigerant |
|
Low pressure side and high pressure side example |
|
Blower motor controller resistance |
|
A/C refrigerant pressure sensor voltage specifications (A/C refrigerant pressure measured by manifold gauge) |
|
Temperature control actuator resistance |
|
Temperature control actuator resistance (Total resistance) |
|
Air flow control actuator resistance |
|
Air flow control actuator resistance (Total resistance) |
|
Air intake control actuator resistance |
|
Air intake control actuator resistance (Total resistance) |
|
Sunload sensor voltage specification |
|
Inside air temperature sensor specification |
|
Compressor drive belt tension |
|
Recommended belt tension meter specification |
|
Magnet clutch coil resistance |
|
Standard clearance between armature plate and magnet clutch pulley |