Home › Engine / Hybrid System › 1GR-FE INTAKE / EXHAUST › EXHAUST MANIFOLD › from 2014.08
RM1440E _51 Engine / Hybrid System _056128 1GR-FE INTAKE / EXHAUST _0273907 EXHAUST MANIFOLD A

1GR-FE INTAKE / EXHAUST  EXHAUST MANIFOLD  REMOVAL  


PROCEDURE

Hide 53737B 5.REMOVE FRONT FENDER APRON SEAL LH

a.
A223333

Remove the 5 clips and front fender apron seal LH.


Hide 53736 6.REMOVE FRONT FENDER APRON SEAL RH

a.
A223336

Remove the 4 clips and front fender apron seal RH.


Hide 53737A 7.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL LH

a.
A223335

Remove the 5 clips and front No. 1 fender apron to frame seal LH.


Hide 53736B 8.REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

a.
A223337

Remove the 5 clips and front No. 1 fender apron to frame seal RH.


Hide 17410 9.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Remove the front exhaust pipe assembly (See page Engine / Hybrid System>1GR-FE INTAKE / EXHAUST>EXHAUST PIPE>REMOVAL).


Hide 17118 10.REMOVE MANIFOLD STAY

a.
A221486

Remove the 3 bolts and manifold stay.


Hide 17361 11.REMOVE AIR TUBE (w/ Secondary Air Injection System)

Hide 17167 12.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A225631

Remove the 3 bolts and No. 1 exhaust manifold heat insulator.


Hide 17104 13.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

a.

Disconnect the air fuel ratio sensor connector.


b.
A222090

Remove the 6 nuts, exhaust manifold sub-assembly RH and gasket.


Hide 89467B 14.REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

Hide 17119 15.REMOVE NO. 2 MANIFOLD STAY

a.
A222091

Remove the 3 bolts and No. 2 manifold stay.


Hide 17362 16.REMOVE NO. 2 AIR TUBE (w/ Secondary Air Injection System)

Hide 17168 17.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A221484

Remove the 3 bolts and No. 2 exhaust manifold heat insulator.


Hide 17105 18.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

a.

Disconnect the air fuel ratio sensor connector.


b.
A222093

Remove the 6 nuts, exhaust manifold sub-assembly LH and gasket.


Hide 89467B 19.REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)